JVC CA-MXSK1 manual 15, Program Play, Programming the Playing Order of the Tracks, Press DISC 3¥8

PROGRAM

CANCEL

Continued

English

Programming the Playing Order of the Tracks

—Program Play

You can arrange the order in which tracks play before you start playing. You can program up to 32 tracks.

•To use Repeat play (see page 16) for Program play, press REPEAT after starting Program play.

1 Load CDs.

•If the current playing source is not the CD player, press DISC 3¥8 , then 7 before going to the next step.

2 Press PROGRAM so that “PRGM” appears on the display.

The PRGM (program) indicator also lights up on the display.

S.MODE

PRGM

6 Press DISC 3¥8. SELECT

The tracks are played in the order you have programmed.

To stop playing, press 7.

To exit from Program play mode, press PROGRAM or

STOP again before or after play. The PRGM (program) indicator goes off.

•Memory content of the relevant disc is erased when tray is ejected.

•All memory content is erased when program is turned off.

•If you try to program a 33rd track “FULL” will appear on the display.

•If your entry is ignored

You have tried to program track number that does not exist on the CD (for example, selecting track 14 on a CD that only has 12 tracks). Such entries are ignored.

•If you want to eject current program play disc

Stop the CD and press 0 to eject. Please note that the program mode is remain eventhough tray is open.

Track number Program Step Disc Number

3 Press one of the disc number buttons (DISC 1, DISC 2 and DISC 3) to select the disc number you want to program.

S.MODE

PRGM

4 Select a track from the CD selected in the above step.

On the unit:

Press 4 or ¢ to select the track number and press SET button.

On the remote control: Press the number buttons.

•For how to use the number buttons, see “To go to another track directly using the number

buttons” on page 14.

S.MODE

PRGM

5 Program other tracks you want.

•To program tracks from the same disc, repeat step 4.

•To program tracks from a different disc, repeat steps 3 and 4.

To check the program contents

Before playing, you can check the program contents. On the remote control:

Press and hold ¢ (NEXT ¡) or

4 (PREV. 1).PREV. NEXT

On the Unit:

Press TUNING +/¡ or 1/–

• TUNING +/ ¡ (or ¢	or
(NEXT ¡)) :
Shows the programmed tracks
in the programmed order.

•TUNING +/ 1 (or 4 (PREV. 1)) : Shows them in the reverse order.

To modify the program on the remote control only

Before or after playing, you can erase the last programmed tracks by pressing PROGRAM CANCEL on the remote control.

•Each time you press the PROGRAM CANCEL

on the remote control the programmed track shown on the display is erased from the program.

•Ejecting a CD will also erase the track numbers programmed from the ejected CD.

To add tracks to the program before playing, simply select

the track numbers you want to add by following step 4 of the programming procedure.

To erase the entire program before or after playing, press

7.

The program you have made will be erased:

•when you unplug the AC power cord.

•when a power failure occurs.

– 15 –