Deli Shop Model 436 Setup Guide
The display group also contains two lamps which light up under certain conditions:
1.The "USE EXACT CHANGE" lamp lights when there are insufficient coins in the merchandiser to provide change for a vend. You can set the criteria for this condition in the programming section.
2.The "SELECTION PRICE" lamp lights when the customer has inserted insufficient credit into the machine to vend the selected product. In conjunction with this lamp lighting, the selection’s price flashes in the digital display.
NOTE
During programming modes, these lights blink whenever a key is pressed as a test of the lamps.
The MODE Switch
All programming procedures begin with this switch. Until you push the switch, the special programming keys will not work, especially the "invisible" keys.
The MODE switch is a large square white button located on the rear of the controller board as shown.
MODE
SWITCH
VIEW LOOKING INTO THE
BACK OF THE VEND DOOR
427P0012
MAIN CONTROLLER
12 | 4360001 |
