Deli Shop Model 436 Setup Guide
Configure
Configure various machine functions:
1. | Press the MODE switch on the main controller. | 4 | 5 | ||
2. | Press | until the display shows | . |
| 9 |
3. | Press | . The display shows the coin mechanism options: | 0 |
| |
| C | ||||
|
|
|
|
| |
| . | = dumb mech |
| D | F |
| . | = MDB |
|
|
|
| . | = Exec mech |
|
|
|
| . | = No mech |
|
|
|
| Press | to switch between the coin mech choices. |
| 427P0014 | |
|
|
|
4. Press . The display shows the bill validator options:
. = Pulse validator (not supported at this time)
. . . = MDB validator. Press 1, 2, or 5 to enable/disable acceptance of that denomination bill.
. . = MDB validator with additional bill selections
Press to enter a list of bills. Two alternating screens appear:
. = Channel 1 and bill is enabled
. = Bill denomination
Press to set bill acceptance ON or OFF
Press to scroll through the list of bills
Press to move up to the top level screen when finished
. = No validator
= coupon bills
5. Press . The display shows the card reader options:
. = Dumb
. = MDB
. = No card reader
6.Press . The display shows .XX. Change will be given for coins or bills up to this amount with- out the customer having to make a selection. For example, if 1.00 is displayed, the machine will give the customer change for a dollar without requiring a selection. Entering 0.00 means that no change will be given.
16 | 4360001 |