Creative 0404 owner manual Asio Direct Monitor Send/Return, Input, RecordingPlayback

	Input
Insert		To Physical Output
Send/Return		From Physical Input

Panning

Fader

Aux 1 Bus

Aux 2 Bus

Main Output Bus

3.Choose one of the Send Outputs. Click on a destination to select it.

4.Choose one of the Return Inputs. Click on a source to select it.

5.Click OK to select the Send and Return or Cancel to cancel the operation.

ASIO Direct Monitor Send/Return

This type of insert send breaks the signal at the insert point and sends it out to the selected ASIO Host Input destination (such as Cubasis). A return source signal is also selected which returns the signal to the channel strip from an ASIO Host Output.

The ASIO Direct Monitor Send/Return is unique in that it utilizes ASIO 2.0 zero-latency monitoring. In order to utilize this feature, Direct Monitoring must be enabled in the audio recording application.

While recording, the Direct Monitor Send/Return routes the signal to the recording application, but monitors directly from the input to eliminate latency. During playback, the recording application automatically switches the Direct Monitor Send/Return to monitor the recorded track.

Input		Input
Direct Mon	Recording	Direct Mon Recording
	Software	Software

RecordingPlayback

The Direct Monitor Send/Return also allows the recording application to control volume and pan. Normally when using direct monitor recording you’ll want to control the volume and pan from the recording application. In this case, set the PatchMix DSP stereo pan controls hard left and right, mono pan controls to center, and the fader to 0dB.

4 - The PatchMix DSP Mixer Mixer Strip Creation

If the source or destination you want to use is not available in the list, they are probably already being used elsewhere. Check the input Strips, Inserts and Output Assignments.

E-MU Digital Audio System 23