Creative 0404 owner manual Distortion, LP Filter, Eq Bw, Gain, Cutoff, Edge, EQ Center

5 - Effects

Core Effects Descriptions

Parameter	Description
Attack Time	Controls how quickly the gain is turned down after the signal
	exceeds the threshold. Range .1ms to 500ms
Release Time	Controls how fast the gain is returned to its normal setting after
	the signal has fallen below the threshold.
	Range: 50ms to 3000ms
Pre-Delay	Allows the use of slower attack times without missing signal peaks.
	Range: 0ms to 3 ms
Input Meter	Allows you to monitor the strength of the input signal.

Gain Reduction Meter Shows the amount of gain reduction being applied.

Distortion

Most audio processors aim to provide low distortion, but not this one! The sole purpose of this effect is to add distortion, and lots of it. This effect provides “fuzz box” style, clipping distortion which is particularly effective on guitar, bass, organs, electric pianos or whatever.

The input signal first passes through a lowpass filter. The Lowpass Filter Cutoff Frequency allows you to control the number of new harmonics that will be generated by the distortion element. The distortion element has an Edge control which controls “how much” distortion will be added. A bandpass filter follows the distortion generator. The EQ Center control lets you select a particular band of frequencies to be output. The EQ Bandwidth controls the width of the center frequency band. Finally, a gain control allows you to make up for any gain loss through the effect.

Use the Wet/Dry mix control in conjunction with the Edge control to reduce the amount of distortion, or go wild and turn everything to 11!

Lowpass	Bandpass
Filter	Filter

In Distortion Out

Signal path = Stereo

LP Filter			EQ BW	Gain
Cutoff		Edge	EQ Center
Parameter	Description
Pre EQ LP Cutoff	Controls the amount of high frequency audio admitted to
	the distortion. Range: 80Hz to 24kHz
Edge	Sets the amount of distortion and new harmonics
	generated. Range: 0-100
Gain	Sets the output volume of the effect. Range: -60dB to 0dB
Post EQ Center Freq.	Sets the frequency of the output bandpass filter.
	Range: 80Hz to 24kHz
Post EQ Bandwidth	Sets the width of the output bandpass filter.
	Range: 80Hz to 24kHz

E-MU Digital Audio System 51