Creative 0404 owner manual Output, The PatchMix DSP Mixer Main Section, Physical Input Display

4 - The PatchMix DSP Mixer

Main Section

Input

Selecting the Input display view shows a graphic representation of the PatchMix DSP Mixer inputs. This screen is only a display unlike the Effects and Outputs screen, which allow you to make routing changes. Input routing changes are made by adding mixer strips. See Mixer Strip Creation.

The input routings are divided into two categories: Physical Inputs and Host Inputs. Select either category by clicking on the Physical or Host button. Clicking on any of the input routings in the TV display highlights the corresponding mixer strip.

Physical Input Display Host Input Display

fThe Input and Output displays make it much easier to understand the signal routings of a complex mixer setup.

fTip: Clicking on any of the input routings in the TV display highlights the corresponding mixer strip.

Output

Selecting the Output display view shows a graphic representation of the PatchMix DSP Mixer outputs. The output routings are divided into two categories: Physical Outputs and Host Outputs. Select either category by clicking on the Physical or Host button.

Physical Output Display Host Output Display

The Host Output display shows all the Insert Routings in addition to the Main Mix and Monitor out routings. Click on the desired row to make or break a physical output connection.

The Physical Output screen displays and allows you to connect the Main and Monitor outputs of the mixer to “physical” analog or digital outputs. Click on the box in the mix or monitor area to make (or break) a connection.

The Host Output screen displays and allows you to view the Host (ASIO or WAVE) outputs of the mixer. See “Insert Section” for information on how to connect the inserts.

34 Creative Professional