Care and Cleaning

COOKER FINISH

CLEANING METHOD

 

 

 

Cloth wrung out in hot soapy water.

Vitreous Enamel

Stubborn stains can be removed with a

Hotplate, burner caps,

cream paste, liquid cleaner or by

grill pan, oven base and rear,

rubbing with fine steel wool soap pads.

inside of grill compartment,

Check that the cleaning agent is

inside of doors, control panel.

approved by the Vitreous Enamel

 

Development Council.

 

 

Paint

 

Plinth, Fascia bottom trim,

Wash with a cloth wrung out in hot

side panels, Lid trim, Rear end

soapy water only.

caps (models with hotplate

DO NOT USE ABRASIVES.

lid)

 

 

 

Aluminium

Similar to paint cleaning above. Use a

nylon brush to remove any cleaning

Hotplate burner bodies

materials, water or dirt from the

 

hotplate burners.

 

 

 

Wipe with a cloth wrung out in hot

Chromium Plating

soapy water.

Oven shelves, grill pan grid,

A fine steel wool soap pad e.g. Brillo,

grill pan handle support

Ajax, or a chrome or stainless steel

 

cleaner may be used.

 

 

Plastic

Wipe with a cloth wrung out in hot

soapy water.

Grill pan handle, door

Stubborn stains can be removed with

handles, control knobs

a cream cleaner.

 

 

 

Glass

As for vitreous enamel cleaning

Lid if fitted

above. Polish with a clean dry cloth or

Door fronts

kitchen towel.

 

 

NOTE: To ensure rapid lighting of the hotplate burners every time they are used, the electrodes must be kept clean and dry. Remove any food spillage or cleaning materials from the electrode using a small nylon brush such as a tooth brush.

18

Page 18
Image 18
Creda GDW51 installation instructions Vitreous Enamel, Paint, Aluminium, Chromium Plating, Plastic, Glass