Creda REFLECTION manual Something Wrong?, Problem, Check

SOMETHING WRONG?

Before calling a Service Engineer, please check through the following lists.

THERE MAY BE NOTHING WRONG.

Problem	Check
Nothing works.	(a) Check
	If you find :-
	Display is blank.
	Then it is likely that there is no electricity supply to your oven.
	Check: (i) That the main cooker wall switch is turned on.
	(ii) Check other appliances to see if you have a power cut.
	(iii) Check the main circuit breaker for the property.
	(iv) With the selector switch (A) turned to the oven
	light does not illuminate.
Display shows 0.00 AUTO.	The power supply to your oven has possibly been interrupted, but has
	now come back on again. Reset the timer to the correct time of day
	and "Manual" operation using instructions given in the timer section
	of the book.
Fan oven does not work but the	Check to ensure that the timer is in Manual Mode:
grill works.
	See timer section for instructions on how to return timer to
	"Manual".
Fan Oven and Grill do not work.	Operating the cooker under the following conditions may cause a
	safety device to operate.
	(a) Grilling with the door closed - always grill with the door open to
	the correct position - see grilling.
	(b) Grilling for an excessively long period at maximum setting -
	see grilling guide.
	(c) Grilling with inadequate ventilation in the cabinet - see
	installation instructions.
Grill does not work.	Check that you have selected :- "Grill" function on the "Fan oven/Grill
	Select" knob (A) and a Grill setting on theGrill Knob (B) - see grilling
	page.
Grill keeps turning on and off.	When the Grill control (B) is operating at less than "6", the grill will
	cycle on and off, this is normal and is not a fault.
Can not set an “Auto Cook”	Remember: "Cook Period" is the actual length of time for which, the
programme	timer will switch the oven on as part of an "Auto Cooking"
	programme.
Draught from beneath control	A gentle flow of air will be blown from beneath the control panel
panel.	when the appliance is used. If the appliance is still warm, this
	cooling fan may run on, or restart itself after all of the controls have
	been turned off.
	The fan will stop once the appliance has been cooled. This is normal
	and not a fault.
Timer buzzer/bleeper operates	Buzzer/Bleeper should stop automatically after 2 minutes (Camargue)
continually	4 minutes Colonial. If not, press minute minder
	button to silence.

If you have been through the above list and there is still a problem;

Contact Service (see Key Contacts back page).

34