Installation

Important

It is essential that the lower cupboard is constructed in the manner illustrated i.e. having side, back, and roof panels so joined as to provide no apertures which could permit access to the oven unit when installed.

1. General

The appliance is designed for mounting at a safe level into an oven housing which must be secured to the backing wall.

2.Ventilation

a.The oven housing unit cabinet dimensions must comply with fig. 4.

b.An air gap of 50mm minimum must be provided at the rear of any top or bottom cupboards or shelves (see fig. 1).

c.It is necessary that the cabinets are provided with unobstructed ventilation, i.e. from adjacent cabinetry. This can be done by either raising the base of the cabinets using the adjusting feet (or spacers) or alternatively by providing a slot in the cabinet plinth to the dimensions in fig. 1.

d.The air gap at rear allows the warmed air to pass out of the inner cabinet space. Where it is intended to fit cupboards above the oven unit to ceiling height, it is essential that the warmed air is exhausted through the front of the cabinet (see fig. 1).

e.If an oven unit is installed adjacent to a tall cabinet, steam escaping from the oven when the door is opened could condense on and maybe stain the adjacent surface. To prevent permanent staining, the adjacent surface should be made of a material that is heat resisting and easy to clean. Adjacent tall cabinets should not be deeper than the oven housing cabinet.

3.Final Installation

a.Using a spirit level, check that the housing cabinet is level from side to side and from front to back in its installed position.

b.Correct any unevenness by placing spacers under the bottom of the cabinet. Make sure that the cabinet rests firmly on the floor without rocking.

c.Before the oven is fitted, the cabinet must be firmly secured to the backing wall for stability.

d.The oven unit should now be lifted (this is a two person lift) into the cabinet and pushed fully home.

e.Finally, the oven is secured to the cabinet by means of the four Pozi Wash Head screws - two through each side trim.

f.Remove all packaging material from the grill and oven interior.

List of loose items:

4 x Pozi Wash Head No. 6 x 15mm screws.

40

Page 39 Page 41
Page 40
Image 40
Creda S150E manual General, Pozi Wash Head No x 15mm screws
Page 39 Page 41

S150E specifications

The Creda S150E is a highly regarded electric storage heater designed to offer effective and energy-efficient heating solutions for residential spaces. As part of the Creda range, this model boasts several features and technologies that set it apart in the market.

One of the main features of the Creda S150E is its compact design, making it suitable for a variety of room sizes, particularly smaller spaces such as apartments or offices. Measuring just the right size, it can be easily installed against walls without taking up excessive space. Its contemporary styling allows it to blend seamlessly with various interior decors, ensuring it doesn’t compromise aesthetic appeal.

The Creda S150E has a notable heat retention capability. Built with a high-quality ceramic core, this storage heater absorbs and retains heat efficiently throughout the day. This is particularly advantageous for users who take advantage of off-peak electricity rates to charge the heater overnight, providing a comfortable ambiance during the day without incurring high energy costs.

The model features advanced electronic controls that enhance its usability. With a programmable timer and integrated thermostat, users can easily set specific heating schedules that align with their lifestyle. This smart technology allows for precise temperature management, ensuring that spaces are warmed up to the desired comfort levels right when needed.

Additionally, the Creda S150E incorporates safety features such as an overheat protection system. This essential technology automatically reduces the heater’s output if it detects excessive temperatures, providing peace of mind for users. A front-mounted control panel allows for easy adjustments, and the unit is designed to operate quietly, eliminating disruptions in home or office environments.

Furthermore, the Creda S150E conforms to energy efficiency standards, contributing to a lower carbon footprint. It operates without the need for flues or fumes, making it an environmentally friendly choice for electric heating.

In summary, the Creda S150E stands out for its efficient heating capabilities, user-friendly controls, and modern design. It represents an effective solution for those seeking reliable and cost-effective heating in their living and working environments, combining convenience with energy efficiency. With its range of features and cutting-edge technology, the Creda S150E is an excellent choice for anyone looking to enhance their heating systems.
Top Page Image Contents