Installation

Electrical Requirements

For your own safety, we recommend that your cooker is installed by a competent person such as one who is registered with NICEIC (National Inspection Council for Electrical Installation Contracting). The cooker should be installed in accordance with the latest edition of the IEE Regulations.

Warning: This appliance must be earthed.

Electrical Connections

The installer must check that the voltage shown at the rating plate corresponds with the house electricity supply.

The cooker must be supplied via a suitable double pole isolating switch, having a contact separation of at least 3mm in all poles placed in a readily accessible position adjacent to the cooker.

If the cooker is to be wired into a connector unit, this may be positioned behind the cooker providing the following requirements are met:

i)The connector unit must not project from the wall more than 25mm.

ii)The top of the connector must not be more than 130mm above floor level.

Remove the terminal cover at the rear base of the cooker. Pass the cable through the cable clamp and connect to the appropriate terminals provided.

Allow sufficient cable for any future servicing.

Tighten the screws on the cable clamp and replace the cover.

Make main connections in the connector unit or cooker control unit.

This appliance conforms to B.S. EN 55014 regarding suppression of Radio and Television reception interference.

Adouble Pole control switch having a minimum rating of 32 amps should be used to feed the cooker using a suitably rated cable.

Where a hob is fitted adjacent to or over the cooker, a 45 amp Double Pole control switch should be used to feed both units via separate suitably rated cables.

We recommend a minimum of 4mm2 PVC insulated twin and earth cable conforming to B.S. 6004 for connection of each appliance.

In all cases adhere to routing details (see fig. 4).

This appliance must not be installed over any other appliance that generates heat such as a plinth heater

Note: Due to many different types of installation, a mains cable is not supplied with this product. The installer will fit the correct type and length of cable.

39

Page 39
Image 39
Creda S150E manual Installation, All cases adhere to routing details see fig

S150E specifications

The Creda S150E is a highly regarded electric storage heater designed to offer effective and energy-efficient heating solutions for residential spaces. As part of the Creda range, this model boasts several features and technologies that set it apart in the market.

One of the main features of the Creda S150E is its compact design, making it suitable for a variety of room sizes, particularly smaller spaces such as apartments or offices. Measuring just the right size, it can be easily installed against walls without taking up excessive space. Its contemporary styling allows it to blend seamlessly with various interior decors, ensuring it doesn’t compromise aesthetic appeal.

The Creda S150E has a notable heat retention capability. Built with a high-quality ceramic core, this storage heater absorbs and retains heat efficiently throughout the day. This is particularly advantageous for users who take advantage of off-peak electricity rates to charge the heater overnight, providing a comfortable ambiance during the day without incurring high energy costs.

The model features advanced electronic controls that enhance its usability. With a programmable timer and integrated thermostat, users can easily set specific heating schedules that align with their lifestyle. This smart technology allows for precise temperature management, ensuring that spaces are warmed up to the desired comfort levels right when needed.

Additionally, the Creda S150E incorporates safety features such as an overheat protection system. This essential technology automatically reduces the heater’s output if it detects excessive temperatures, providing peace of mind for users. A front-mounted control panel allows for easy adjustments, and the unit is designed to operate quietly, eliminating disruptions in home or office environments.

Furthermore, the Creda S150E conforms to energy efficiency standards, contributing to a lower carbon footprint. It operates without the need for flues or fumes, making it an environmentally friendly choice for electric heating.

In summary, the Creda S150E stands out for its efficient heating capabilities, user-friendly controls, and modern design. It represents an effective solution for those seeking reliable and cost-effective heating in their living and working environments, combining convenience with energy efficiency. With its range of features and cutting-edge technology, the Creda S150E is an excellent choice for anyone looking to enhance their heating systems.