Electrical Requirements

Supply

This appliance should be connected to the mains supply via a

 

suitable switched socket, which is in a position accessible after

 

installation. Refer to rating plate for the supply voltage.

 

 

 

 

Warning: This appliance must be earthed.

 

Changing the

 

 

The flexible mains lead is supplied connected to a BS1363 fused

Plug

plug with a 13 amp capacity.

 

 

 

If this plug is removed or cut off, it should be properly disposed

 

of and not left where children might find it and plug into a

 

supply socket – with the obvious consequent danger of

 

electrocution.

 

 

 

Rewirable Plug

GREEN & YELLOW

TO EARTH

 

13

 

AMP

 

FUSE

 

BROWN

BLUE

TO

TO

CORD LIVE

NEUTRAL

CLAMP

Moulded Plug

The wires in the mains lead are in accordance with the following:

GREEN/YELLOW – EARTH

BLUE

– NEUTRAL

BROWN

– LIVE

If the plug is changed, the coloured wires in the mains lead may not correspond with the colours of the markings identifying the terminals in the plug. Therefore wire is as shown above. Should the mains lead ever require replacement, this operation must be carried out by a competent person. Only use specially prepared 3 core 1.50mm2 recommended spares cable.

The correct replacement of the fuse is identified by the colour coding in the base of the plug or the colour that is embossed in words in the base of the fuse recess, or elsewhere on the plug. Only 13 amp replacement fuses which are ASTA approved to BS1362 should be fitted. After replacement of a fuse in the plug, the fuse cover must be refitted. Fuse covers may be obtained from your local Regional Electricity Company.

WARNING: The plug must not be used without a fuse cover.

NOTE: Replacement mains cables must only be obtained from our recommended Spares stockist.

NOTE: IF IN DOUBT CONSULT A QUALIFIED ELECTRICIAN.

13

Page 13
Image 13
Creda Tumble Dryer manual Electrical Requirements, Rewirable Plug, Moulded Plug