Before calling a Service Engineer, please check through the following list.
THERE MAY BE NOTHING WRONG
Something Wrong?DRYER WILL NOT START
Has the fuse blown in the plug or the
main fuse box?
(Try plugging in another appliance to
check)
CHECK THE POWER SUPPLY
LOAD IS NOT DRY OR TAKES
LONGER THAN NORMAL TO DRY
If the fuse has blown in the plug
top, refer to Electrical Require-
ments.
Are you using an extension lead?
(Many extension leads are not
suitable. Try plugging the Dryer
directly into a socket to check.)
Does the fluff filter need cleaning?
(It should be cleaned after every load)
Does the water container need
emptying?
(It should be emptied after every load)
Does the Condenser unit need
cleaning?
(It should be cleaned every month)
Have the Air intake grille or rear
Vents of the Dryer been obstructed?
Has the Empty water light come on?
(Empty the Water bottle after every load)
Is the Door fully closed?
(Try opening and closing the door again)
Have you selected the correct heat
setting? (Refer to Drying Guide and
check the heat setting switch)
Have you mixed cottons with
synthetics? (See page 7)
Has the Timer control been set?
(Try resetting the timer and pressing the
start button again)
Have you selected the correct time
for the load? (Refer to Drying Guide –
this can vary according to Washing
machine spin speeds, load size and
fabrics being dried).
Has the Start button been pressed
hard enough? (Try pressing Start again)
IMPORTANT NOTICE:The Start
button must be pressed every time the
door is opened to re-start the
programme.
If you have been through the above and there is still a problem, you should identify your
Service Agent using the list on the next page and contact your Local Service Office.
CHECK THE FOLLOWING
CHECK THE SETTINGS CHECK THE SETTINGS