How to operate your Dryer
1.Ensure hands are dry. Plug the appliance in. Switch on at the wall socket.
2.Open the Door by pressing the Front panel as shown.
PUSH HERE &
RELEASE TO
OPEN DOOR
3.Place the selected fabrics into the Dryer. Ensure the fabrics are pushed towards the back of the Drum and away from the Door seal.
4.Always check the following:
FLUFF FILTER
is clean and in place
WATER CONTAINER
is empty and in place
CONDENSER
is in place
5. Close the Door.
6.Select the required heat setting.
Press switch in at Top
Low Heat Acrylics and Synthetics
Press switch in at Bottom High Heat Cottons
Press here for Low
Press here for High
9
