CD43 mk2 Compact Disc Player
CONNECTING THE COMPACT DISC
CAUTION | 1. LINE OUT SOCKETS |
uBefore connecting or disconnecting a unit from your audio system, make sure that you switch off the power to each component.
u Ensure that you make the correct connections, paying attention to the L (left channel) and R (right channel) marks. Plug in the cable securely. Loose connections will result in unsatisfactory sound reproduction or noise problems.
uIf this unit interferes with the tuner, switch it off during tuner operation.
Connect one end of the interconnect cable to the unit's AUDIO OUTPUT sockets and the other end to the sockets labelled CD or A U X, or to other line inputs on the amplifier. Do not connect it to the amplifier's PHONO input if a phono circuit is installed.
2.DIGITAL OUTPUT
This output enables you to connect the CD player to a
3.AC POWER SOCKET, IEC TYPE
4.AC POWER CORD
Power |
|
|
| |
on/off |
| Audio | ||
switch I / 0 |
| Output | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A C Mains |
| A C Mains |
Input |
| Fuse |
|
|
|
|
|
|
After completing the installation and all connections, make sure that the P O W E R switch on the front panel of the unit is set to OFF.Then plug the power cord into a live AC outlet.
Digital
Output
C D Player
Integrated stereo amplifier
WARNING
UNAUTHORISED RECORDING OF COPYRIGHT MATERIAL MAY VIOLATE APPLICABLE COPYRIGHT LAWS. THE DISTRIBUTOR ASSUMES NO RESPONSIBILITY FOR THE UNAUTHORISED DUPLICATION, USE OR OTHER ACTS, WHICH INFRINGE UPON THE RIGHTS OF COPYRIGHT OWNERS.
4
