CD43 mk2 Compact Disc Player
playing from the beginning of the first track.
You may also go straight to a specific track
by using one of the SKIP buttons 
or
. In this case the disc will start playing the selected track when the PLAY button is pressed. The numeric keys on the remote handset allow direct access to the desired track.
7.At the end of the last track the CD will return to a waiting mode.
NOTES:
u If the CD is deeply scratched or too dirty, disc play may not start. If an improperly centered disc is played, noise will be heard in the mechanism. Avoid using such discs.
u Some discs of poor manufacture may not be readable or may skip, check another disc should this occur.
u Some discs will take a long time to read the TOC if they have a lot of tracks, i.e. more than 20.
O P E R ATION
STA N D B Y
When switching on from Standby, if there is no disc in the CD43 mk2, the display will show no dISC.
If there is a disc in the CD43 mk2, the track display will show dISC until the TOC (table of contents) has been read.
When the TOC has been read, the CD43 will display the information, i.e. the total number of tracks and total playing time.
INSERTING A DISC
Press the OPEN/CLOSE button on the front panel or DISC on the handset, the disc tray will open and the OPEN sign will be displayed.
Insert the disc and press the OPEN/CLOSE or DISC button again to close the tray.
The disc will start spinning and the total number of tracks will be read. The disc will then stop and the display will show the TOC (table of contents), being the total number of tracks and the total playing time.
TO PLAY A DISC
Press the PLAY button. The disc will start playing.
The track number 1 will be displayed,
together with the PLAY 
symbol and the elapsed time of the track being played.
The calendar will show the total number of tracks on the disc and the symbol for track 1 will start flashing.
TO ‘STOP DISC PLAY
9
