Cres Cor RR-1332 Series Retherm Ovens Operating Instructions For Ovens With Optional Product Keys

5925 Heisley Road • Mentor, OH 44060-1833

Retherm	FL-2273
Ovens
Rev. 2 (6/08)	Page 11 of 11

OPERATING INSTRUCTIONS

FOR OVENS WITH OPTIONAL PRODUCT KEYS

POWER SWITCH PRODUCT KEYS PROBE RECEPTACLE CONTROL

ON	MODE	TIME - TEMPERATURE
	PROBE	TIMED
	SELECT	HEAT	COOK	HOLD
		OVEN	START	STOP
		TEMP

OFF

POWER

SETPOINTS

RETHERM

COOK

TIME

SET

PROBE

HOLD

CONTROL PANEL

The Product Keys provide automatic menu selections (arranged in banks of 5 keys, max. 10 keys). Each Product Key can be user programmed for desired mode (PROBE or TIMED) and the required COOK, HOLD, and PROBE or TIME setpoints.

Each Product Key Lights up when pressed “ON”. The Product Key Light will go “OFF” when pressed a second time or when changing any setpoint value. This returns the control to manual operation.

Product Key Programming

1.Press the desired Product Key.

2.Press and hold the SET key until the Product Key light begins to flash.

3.Enter the desired Mode, Cook, Hold and Probe/Time values.

NOTE: Press the SET key after each value is changed or added to accept and store a new setpoint.

4.To exit; Press the SET key for a few seconds until the Product Key light is extinguished.

Extra Replacement Parts: Product Key (5 Keys) 0848-072

For Hot Unit Replacement, See Page 9:

The Hot Unit suffix number will be Q5 (5 Keys) or Q10 (10 Keys) instead of Q1

Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com