Crest Audio LQ 10P Front Panel Features, 6 4 POWER LED, Line In/Thru, Level, Link Jacks

PANEL FEATURES

Front Panel Features

5 4 7

6

(4) POWER LED

Illuminates when the preamp electronics receive power and should illuminate when the On-Off Switch is in the ON position and the AC power cord is connected and plugged into the wall outlet.

(5) LINE IN/THRU

The input and output jacks are paralleled to allow the audio input signal to be daisy-chained to other devices.The “output” level is the same as the “input” level and there is no isolation between the various jacks.The input is medium impedance balanced. Jack (5a) is a combo female XLR and 1/4" RTS connector, and jack (5b) is a male XLR.

(6) LEVEL

Controls the gain of the LQ 10P system.When used with the Line

In/Thru jacks (5), it directly sets the system output level.

(7) LINK JACKS

Link Out takes the signal after the balanced inputs and the level control and allows linkage to another LQ 10P via its Link In jack. The level control on the first powered speaker now controls the level of the linked powered speaker.These are unbalanced high-Z jacks, so do not run the cable very far.

6