Crest Audio X 18R, X 20R owner manual Solo LED, Pwr Led

Master Section 3

Front Panel Features

12V Lamp Jack

A TNC jack is available for attaching a goose-neck lamp.The center connection is 12 Volts DC and the outer connection is ground. A medium or high-intensity incandescent or LED 12V DC Littlite can be used.The output voltage is current limited to prevent faulty bulbs or mis-connection from harming the internal workings of the mixer.

LED Meters - Left And Right

A pair of LED arrays are provided for monitoring the output levels.They follow the SOLO system, making it easy to adjust input and output levels by PFL’ing and AFL’ing different sources.They normally show the LEFT and RIGHT output levels.When some- thing is Soloed, that signal replaces LEFT and RIGHT on the meters.

SOLO LED

This red LED lights up when anything on the mixer is soloed.

PWR LED

This green LED illuminates to indicate that the mixer is powered up.

TAPE IN Level

On the rear panel there are Left and Right TAPE IN connectors, both 1/4” TRS and RCA.They can be used to bring in a stereo source such as a two-track playback from tape, CD, MD, or a sampler.This knob controls the level to the Aux 1/2 and Left/Right buses.

TAPE IN Assignment

TOA1-2This assigns the stereo TAPE IN to Auxes 1 and 2, which are configured as a stereo pair. This is useful for stereo program monitoring.

TO L-RThis assigns the stereo TAPE IN feed to the Left and Right mix buses. This is useful for in-between-set background music and as an extra stereo return.

p. 35