ACTIVE RE-ARMING:
Active
OVERRIDE:
If you have lost the transmitter or it stops working for any reason and the Alarm is armed, you will have to open the door with the key, which will activate the alarm. Turn the ignition on and press the override/program button about 2 seconds. The Alarm will disarm and enter the Valet mode, which allows you to use the vehicle until you can repair/replace the remote transmitter at which time you can take the vehicle out of valet.
ALARM PROGRAMMING OPTIONS
Programming options are accessed by turning the ignition on and pressing the override/program button 5 times within 5 seconds. You will hear a 2 second chirp from the siren. Within the next 5 seconds press the override/program button again the number of times that corresponds to the listed feature below. The siren will chirp once for each button press. One you are at the desired option number, press the lock or unlock button on the transmitter to change the option. If the lock button is pressed, 1 siren chirp will sound. If the unlock button is pressed, 2 siren chirps will sound. Pressing TX button 2 for any of the options will change the selected option from default to the alternate setting (i.e. pressing the unlock button when the option for Autolock is selected will turn Autolock off. The Autolock feature is ON by default from the factory). See list below for option selections.
Option Number | Feature Description | Button #1 (Lock) Default | Button 2 (Unlock) |
1. | Passive Arming | ON | OFF |
2. | Lock w/Passive Arm | ON | OFF |
3. | Autolock on/off | ON | OFF |
4. | 0.7 or 3 Second Lock Pulse | 0.7 Sec. | 3 Sec. |
5. | Double Unlock Pulse | OFF | ON |
ALARM PROGRAMMING OPTIONS
SILENT ARM/DISARM PROGRAMMING:
8