Crown CTS 4200 Advanced Features and Options, CTs Multi-Channel Power Amplifiers, page, Detent

CTs Multi-Channel Power Amplifiers

5 Advanced Features

and Options

5.2.4 Channel Level Control

The signal level for each input can be attenu- ated accurately by adjusting the 21-step Level Control (see Section 4.2). Figure 5.2 shows the amount of attenuation in dB for each detent.

Note: Attenuation per detent varies with operat- ing mode since gain varies with operating mode. Attenuation amounts shown may vary ±6%.

ATTENUATION in dB

Detent	4/8 Ohm	70V	100V
0 (full CCW)	-68.31	-72.90	-71.02
1	-67.54	-72.06	-70.26
2	-32.23	-36.61	-34.90
3	-25.46	-29.74	-28.00
4	-21.83	-25.87	-24.22
5	-19.23	-23.20	-21.58
6	-17.12	-20.94	-19.40
7	-15.36	-19.02	-17.53
8	-13.76	-17.22	-15.79
9	-12.28	-15.53	-14.20
10	-10.84	-13.90	-12.62
11	-9.51	-12.32	-11.16
12	-8.28	-10.87	-9.81
13	-7.09	-9.45	-8.45
14	-6.30	-8.11	-7.22
15	-4.92	-6.70	-5.94
16	-3.82	-5.26	-4.63
17	-2.62	-3.70	-3.21
18	-1.35	-1.90	-1.66
19	-0.01	-0.01	-0.01
20 (full CW)	0.00	0.00	0.00

Figure 5.2 Level-control Attenuation per Detent

Operation Manual page 15