| XLC Series Power Amplifiers | XLC系列功率放大器 |
2. Setup | 2. 安装 | |
Figure 2.1 Package
图2.1 包装
2.1 Unpacking
Please unpack and inspect your XLC amplifier for any damage that may have occurred during transit. If damage is found, notify the transportation company immediately. Only you can initiate a claim for shipping damage, though Crown will be happy to help as needed. If the product arrived showing signs of damage, save the shipping carton for the shipper’s inspection.
We also recommend that you save all packing materials so you will have them if you ever need to transport the unit. Never ship the unit without the factory carton and packing materials.
Package contains:
•One XLC amplifier;
•One Power Cord (compatible to retailer’s location);
•One operation manual (this manual);
•One product registration form (at the end of this manual);
•One warranty card (at the end of this manual).
For installation, you will need (not supplied):
•Input wiring cables
•Output wiring cables
•Rack for mounting amplifier (or a stable surface for stacking)
NOTE: Before you start to set up your amplifier, make sure you read and observe the Important Safety Instructions found at the beginning of this manual.
2.1拆箱
请将包装箱打开并检查运输过程中设备是否受到损坏。如果发现损坏，请立即通知运输公司。 尽管 Crown 非常乐意在需要时提供帮助，但只有您可以对运输损坏提出索赔。如果产品到达时 显示损坏迹象，请保留包装箱，供运送方核查时，作为认定设备受损的证据。
另外，我们建议您保存所有的包装材料，留待将来运输设备时使用。请不要在没有使用原厂包装 箱和包装材料的情况下装运设备。
单套包装包括：
•一台XLC功率放大器；
•一根电源线（规格与经销商所在地匹配）；
•一本操作说明书（本说明书）；
•一份产品注册表（本说明书最后部分）；
•一张保修卡（本说明书最后部分）。
安装时，您还需要（未提供）：
•输入信号电缆；
•输出信号电缆；
•用于架设功放的设备支架或稳固台面。
注意：在您安装使用本功放前，请确保已经阅读并遵守本手册前面所列的重要安全信 息。
page 6 Operation Manual | 操作手册 |
