Viii Wiring

2)Do not use compression fittings in oil piping.

3)Do not use Teflon tape in oil piping

4)Do not manifold multiple oil appliances on a two-pipe system. Run dedicated lines for each appliance back to the tank or use a transfer pump and day tank to get oil to a location where it can be gravity fed to each appliance.

5)Do not use check valves in gravity feed systems.

6)Where a new oil tank is to be installed, and where codes permit, the best location for the tank is in a warm space (such as basement) where a one-pipe gravity system can be used. Such a location will eliminate problems caused by air-infiltration and cold oil.

7)Use only #2 fuel oil with physical and chemical characteristics meeting the requirements in ASTM D-396.

CAUTION

Fuel oil will attack silicone pressure switch tubing. If at all possible, route oil lines under air inlet collar.

WARNING

All wiring and grounding must be done in accordance with the authority having ju- risdiction or, in the absence of such requirements, with the National Electrical Code (ANSI/NFPA 70).

Figure 22 is a connections diagram for the ODV boiler. The following connections must be made in the field:

L1 – Line voltage “hot”

L2 – Line voltage “neutral

C1 – Circulator “hot”

C2 – Circulator “neutral”

T, T – 24 volt thermostat connections.

Green Screw in L7248A – Ground connection

This boiler must be wired to a dedicated circuit having a 15-amp fuse or circuit breaker. The minimum size wire that should be used in this circuit is 14 AWG.

If this boiler is to be used in a multiple zone installation, T, T are generally connected to either zone valve end switches or a set of dry relay contacts which will start the boiler when any one zone calls for heat. A separate transformer must be used to power zone valves. If this boiler is to be used in a circulator zone system, terminals C1 and C2 cannot be used as they will be energized regardless of which zone is calling for heat.

ODV-75, ODV-100, ODV-125 specifications

Crown Boiler Company is renowned for producing high-quality heating solutions, and their ODV series is no exception. The ODV-125, ODV-100, and ODV-75 models are part of this advanced product line, designed for residential and light commercial applications. These models exemplify Crown Boiler's commitment to innovation, performance, and efficiency.

One of the main features of the ODV series is its unique vertical design, which helps in optimizing space in various settings, making them ideal for installations where space is at a premium. Each model is engineered to provide reliable heating with output capacities of 125, 100, and 75 MBH respectively. This range allows homeowners to select a unit that best meets their specific heating demands, ensuring comfort without unnecessary energy expenditure.

Technology plays a crucial role in the performance of the ODV series. The units are equipped with stainless steel burners that provide enhanced durability and efficiency. These burners are designed to achieve high combustion efficiency, minimizing fuel consumption and reducing emissions. Additionally, the ODV models feature an integrated electronic ignition system which ensures a reliable start-up and reduces the wear and tear associated with traditional standing pilot systems.

When it comes to construction, the ODV series units are built with a heavy-duty steel casing that provides excellent thermal insulation. This design not only contributes to the efficiency of the boilers but also ensures quiet operation, making them suitable for residential environments. The corrosion-resistant heat exchanger further enhances longevity, providing homeowners with peace of mind regarding their investment.

Another characteristic that sets the ODV series apart is its versatility. These boilers can be configured for use with multiple heating applications, including hot water supply and radiant heating systems. The ODV models also feature easy access to internal components for maintenance and servicing, which is a significant advantage for HVAC professionals.

In summary, the Crown Boiler ODV-125, ODV-100, and ODV-75 models represent the pinnacle of residential heating technology. With their efficient design, advanced burner technology, and ease of maintenance, these units are sure to provide reliable performance for years to come. Whether for a cozy home or a light commercial space, the ODV series offers a solution that balances comfort, efficiency, and durability.

Crown Boiler ODV-100, ODV-125, ODV-75 manual Viii Wiring

Models: ODV-75 ODV-100 ODV-125

VIII WIRING