Cub Cadet 59A40003727 To The Dealer, To The Owner, Contents, RH Mount, Flat Washer, LH Mount

SECTION 4: TO THE DEALER

Assembly and proper installation of this attachment is the responsibility of the Cub Cadet Yanmar dealer. Read the instructions and safety precautions found in this manual carefully. Any and all front-end attachments installed on the tractor must first be removed in order to properly install the Front-end Loader.

SECTION 5: TO THE OWNER

Model 59A40003727 Front-end Loader is designed for use ONLY with specific Cub Cadet Yanmar tractor models. It will NOT fit nor operate safely or properly on or with any other tractor.

References to LEFT and RIGHT indicate the left and right sides of the tractor when facing forward in the operator’s position. Reference to the FRONT indicates the grille end; to the REAR the drawbar end.

SECTION 6: CONTENTS

The front loader attachment components are listed below along with their part numbers. Assemblies are made up of more than one part and do not have a part number. Before beginning installation, lay all components out on a flat surface to assure everything is present. Throughout the manual the parts in the hardware pack will be identified by name, followed by their callout number in parenthesis, to aid in installation.

				1
	4					3
					2
	5
	6
				9
	7
	8				10
			Figure 1
1	RH Mount	603-04404 1 pc		7	Flat Washer	736-0192	8 pc
2	LH Mount	603-04403 1 pc		8 Hex Lock Nut, 1/2-16 Gr5		712-3083	8 pc
3	Front Mount Receiver	603-04402 1 pc		9	Mounting Pin	711-04771	2 pc
4	Hex Cap Screw, M16-2.0 x 60 ...	710-04700	6 pc	10 Lynch Pin		714-0220A 2 pc
5	Hex Cap Screw, M16-2.0 x 100..	710-04701	4 pc	Not Shown - Loader Bucket		603-04399 1 pc
6	Hx Cp Scrw, 1/2-13 x 1.75 Gr5 ...	710-3067	8 pc	Not Shown - Complete Mast & Boom Assembly 1 pc

8