Safety (continued)

•Always stop the engine and allow it to cool before filling the fuel tank. Never remove the cap of the fuel tank, or add fuel, when the engine is hot. Never operate the unit without the fuel cap securely in place. Loosen the fuel tank cap slowly to relieve any pressure in the tank.

•Add fuel in a clean, well-ventilated area outdoors where there are no sparks or flames. Slowly remove the fuel cap only after stopping engine. Do not smoke while fueling or mixing fuel. Wipe up any spilled fuel from the unit immediately.

•Avoid creating a source of ignition for spilled fuel. Do not start the engine until fuel vapors dissipate.

•Move the unit at least 30 feet (9.1 m) from the fueling source and site before starting the engine. Do not smoke, keep sparks and open flames from the area while adding fuel or operating the unit.

WHILE OPERATING

•Never start or run the unit inside a closed room or building. Breathing exhaust fumes can kill. Operate this unit only in a well ventilated area outdoors.

•Wear safety glasses or goggles that are marked as meeting ANSI Z87.1 standards, and ear/hearing protection when operating this unit. Wear a face or dust mask if the operation is dusty.

•Wear heavy, long pants, boots, gloves and a long sleeve shirt. Do not wear loose clothing, jewelry, short pants, sandals or go barefoot. Secure hair above shoulder level.

•The cutting attachment shield must always be in place while operating the unit. Do not operate unit without both trimming lines extended, and the proper line installed. Do not extend the trimming line beyond the length of the shield.

•This unit has a clutch. The cutting attachment remains stationary when the engine is idling. If it does not, have the unit adjusted by an authorized service technician.

•Adjust the D-Handle to your size to provide the best grip.

•Be sure the cutting attachment is not in contact with anything before starting the unit.

•Use the unit only in daylight or good artificial light.

•Avoid accidental starting. Be in the starting position whenever pulling the starter rope. The operator and unit must be in a stable position while starting. See

Section 5, Operation.

•Use the right tool. Only use this tool for the purpose intended.

•Do not overreach. Always keep proper footing and balance.

•Always hold the unit with both hands when operating. Keep a firm grip on both the front and rear handle or grips.

•Keep hands, face, and feet at a distance from all moving parts. Do not touch or try to stop the cutting attachment when it is rotating.

•Do not touch the engine, gear housing or muffler. These parts get extremely hot from operation. When turned off they remain hot for a short time.

•Do not operate the engine faster than the speed needed to cut, trim or edge. Do not run the engine at high speed when not cutting.

•Always stop the engine when cutting is delayed or when walking from one cutting location to another.

•If you strike or become entangled with a foreign object, stop the engine immediately and check for damage. Do not operate before repairing damage. Do not operate the unit with loose or damaged parts.

•Stop and switch the engine to off for maintenance, repair, or for changing the cutting attachment or other attachments.

•Use only genuine manufacturer’s replacement parts and accessories for this unit. These are available from your authorized service dealer. Use of any parts or accessories not authorized by the manufacturer could lead to serious injury to the user, or damage to the unit, and void your warranty.

•Keep unit clean of vegetation and other materials. They may become lodged between the cutting attachment and shield.

•To reduce fire hazard, replace faulty muffler and spark arrestor, keep the engine and muffler free from grass, leaves, excessive grease or carbon build up.

OTHER SAFETY WARNINGS

•Never store the unit, with fuel in the tank, inside a building where fumes may reach an open flame or spark.

•Allow the engine to cool before storing or transporting. Be sure to secure the unit while transporting.

•Store the unit in a dry area, locked up or up high to prevent unauthorized use or damage, out of the reach of children.

•Never douse or squirt the unit with water or any other liquid. Keep handles dry, clean and free from debris. Clean after each use, see Cleaning and Storage instructions.

•Keep these instructions. Refer to them often and use them to instruct other users. If you loan someone this unit, also loan them these instructions.

SAVE THESE INSTRUCTIONS

4

Page 3 Page 5
Page 4
Image 4
Cub Cadet CC3000 manual While Operating, Other Safety Warnings, Operation
Page 3 Page 5

CC3000 specifications

The Cub Cadet CC3000 is a versatile and robust riding mower designed to cater to the needs of homeowners with medium to large lawns. This machine combines power and efficiency, making lawn care a seamless and enjoyable task.

One of the standout features of the CC3000 is its powerful engine. Equipped with a reliable and efficient Kohler engine, it delivers ample power to handle various mowing conditions. Whether the grass is thick or wet, the CC3000 can handle it with ease, ensuring a clean and even cut every time.

The cutting deck of the CC3000 is another impressive characteristic. With a 42-inch stamped steel cutting deck, it provides plenty of coverage while maintaining maneuverability. The deck features a triple-blade system, which not only enhances the mowing efficiency but also ensures better grass clippings dispersion, promoting a healthier lawn. The deck height is adjustable, allowing users to customize their grass cutting height according to personal preferences and seasonal needs.

One notable technological advancement in the CC3000 is its SmartJet technology. This innovative feature optimizes cleaning by directing water to the blade area when the mowing is complete. Simply connect a hose to the deck washout port, and the system takes care of the rest, ensuring that the underside of the deck remains clean and free from clippings, enhancing the mower's longevity.

User comfort and convenience are paramount in the design of the CC3000. The spacious operator station includes a high-back seat with ample cushioning, providing support during extended mowing sessions. The controls are intuitively laid out, allowing for easy engagement of the cutting blades and adjustments to mower speed. Additionally, the zero-turn capability enhances maneuverability around trees, flower beds, and other obstacles.

Another key characteristic of the CC3000 is its rugged build quality. Constructed with durable materials, this mower is designed to withstand the rigors of regular use. Coupled with its reliable engine and robust components, the CC3000 promises longevity and dependable performance.

In summary, the Cub Cadet CC3000 is an excellent choice for those looking for a reliable, feature-rich riding mower. With its powerful engine, efficient cutting system, advanced technologies, and user-friendly design, it stands out as an ideal solution for maintaining a beautiful lawn with minimal effort. Whether you're tackling large areas or navigating tight spots, the CC3000 is equipped to make lawn care a breeze.
Top Page Image Contents