Maintenance (continued)

REPLACING THE SPARK PLUG

Use a Champion RCJ6Y spark plug (or equivalent). The correct air gap is 0.025 inch (0.655 mm). Remove the plug after every 25 hours of operation and check its condition.

1.Stop the engine and allow it to cool. Grasp the plug wire firmly and pull the cap from the spark plug.

2.Clean dirt from around the spark plug. Remove the spark plug from the cylinder head by turning a 5/8 inch socket counterclockwise.

3.Replace cracked, fouled or dirty spark plug. Set the air gap at 0.025 inch (0.655 mm) using a feeler gauge (Fig. 6-15).

Do not sand blast, scrape, or clean electrodes. Grit in the engine could damage the cylinder.

4.Install a correctly gaped spark plug in the cylinder head. Tighten by turning the 5/8 inch socket clockwise until snug.

If using a torque wrench torque to: 110-120 in.•lb. (12.3-13.5 N•m). Do not over tighten.

0.025 inch

(0.655 mm)

Fig. 6-15

ACCESSORIES/REPLACEMENT PARTS

Spark Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 791-181765 Spark Arrestor . . . . . . . . . . . . . . . . . . . . . . . . . . . 791-181696 Replacement Line Cartridge . . . . . . . . . . . . . . . . . . . 153-1160 Inner Reel Spring . . . . . . . . . . . . . . . . . . . . . . . . . 791-610636 Bump Head Knob Assembly . . . . . . . . . . . . . . . . . 791-180814 Fuel Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 791-180000 Brushcutter Accessory Kit . . . . . . . . . . . . . . . . 41AM079G100 Shoulder Harness . . . . . . . . . . . . . . . . . . . . . . . . . 791-682075 Tip-and-Pour 2-Cycle Oil (16 oz.) . . . . . . . . . . . . . .791-180965

These replacement parts can be purchased at the retailer from which you bought your trimmer, or your local Cub Cadet dealer.

CLEANING

To avoid serious personal injury, always turn your trimmer off and allow it to cool before you clean or do any maintenance on it.

Use a small brush to clean off the outside of the unit. Do not use strong detergents. Household cleaners that contain aromatic oils such as pine and lemon, and such as kerosene, can damage plastic housing or handle. Wipe off any moisture with a soft cloth.

STORAGE

Never store the unit with gasoline in the tank where fumes may reach an open flame or spark.

Allow the engine to cool before storing.

Store the unit locked up to prevent unauthorized use or damage.

Store the unit in a dry, well ventilated area.

Store the unit out of the reach of children.

LONG TERM STORAGE

If the unit will be stored for an extended time,

1.Drain all fuel from the gas tank into a container. Do not use fuel that has been stored for more than 60 days. Dispose of the old fuel in accordance to Federal, State, and Local regulations.

2.Start the engine and allow it to run until it stalls. This ensures that all gasoline has been drained from the carburetor.

3.Allow the engine to cool. Remove the spark plug and put 1 oz. (30 ml) of high quality motor oil into the cylinder. Pull the starter rope slowly to distribute the oil. Reinstall the spark plug.

NOTE: Remove the spark plug and drain all of the oil from the cylinder before attempting to start the trimmer after storage.

4.Thoroughly clean the unit and inspect for any loose or damaged parts. Repair or replace damaged parts and tighten loose screws, nuts or bolts. The unit is ready for storage.

TRANSPORTING

Allow the engine to cool before transporting.

Secure the unit while transporting.

Drain the gas tank before transporting.

Tighten gas cap before transporting.

17

Page 17
Image 17
Cub Cadet CC3000 Replacing the Spark Plug, ACCESSORIES/REPLACEMENT Parts, Cleaning, Long Term Storage, Transporting

CC3000 specifications

The Cub Cadet CC3000 is a versatile and robust riding mower designed to cater to the needs of homeowners with medium to large lawns. This machine combines power and efficiency, making lawn care a seamless and enjoyable task.

One of the standout features of the CC3000 is its powerful engine. Equipped with a reliable and efficient Kohler engine, it delivers ample power to handle various mowing conditions. Whether the grass is thick or wet, the CC3000 can handle it with ease, ensuring a clean and even cut every time.

The cutting deck of the CC3000 is another impressive characteristic. With a 42-inch stamped steel cutting deck, it provides plenty of coverage while maintaining maneuverability. The deck features a triple-blade system, which not only enhances the mowing efficiency but also ensures better grass clippings dispersion, promoting a healthier lawn. The deck height is adjustable, allowing users to customize their grass cutting height according to personal preferences and seasonal needs.

One notable technological advancement in the CC3000 is its SmartJet technology. This innovative feature optimizes cleaning by directing water to the blade area when the mowing is complete. Simply connect a hose to the deck washout port, and the system takes care of the rest, ensuring that the underside of the deck remains clean and free from clippings, enhancing the mower's longevity.

User comfort and convenience are paramount in the design of the CC3000. The spacious operator station includes a high-back seat with ample cushioning, providing support during extended mowing sessions. The controls are intuitively laid out, allowing for easy engagement of the cutting blades and adjustments to mower speed. Additionally, the zero-turn capability enhances maneuverability around trees, flower beds, and other obstacles.

Another key characteristic of the CC3000 is its rugged build quality. Constructed with durable materials, this mower is designed to withstand the rigors of regular use. Coupled with its reliable engine and robust components, the CC3000 promises longevity and dependable performance.

In summary, the Cub Cadet CC3000 is an excellent choice for those looking for a reliable, feature-rich riding mower. With its powerful engine, efficient cutting system, advanced technologies, and user-friendly design, it stands out as an ideal solution for maintaining a beautiful lawn with minimal effort. Whether you're tackling large areas or navigating tight spots, the CC3000 is equipped to make lawn care a breeze.