8-6
8. OPERATING THE TRACTOR
Ex2900 / 3200 Operator's Manual
Fastening the Retractable Seat Belt
Avoid injury:
ALWAYS keep the retractable seat belt fastened
while operating the tractor with the Roll-Over
Protective Structure (ROPS) in the upright position.
This will reduce the possibility of injury or death in
the event of an accident such as an overturn or roll-
over.
NEVER use the retractable seat belt when operating
the tractor without the Roll-Over Protective
Structure (ROPS) or with the foldable Roll-Over
Protective Structure (ROPS) in the folded position.
1. Draw out the right and left segments of the retractable
seat belt from the retracted positions on both sides of
the operator's seat.
2. Connect both segments of the belt with the buckle,
being careful to avoid twisting of the belt, adjust the
belt length, being suitable for the operator.
(A)Buckle
(a) Adjust the belt length
If the retractable seat belt is situated far away from
the operator's abdominal area, a dangerous
situation can be present in the event of an accident.
ALWAYS ensure that the retractable seat belt is in
the lowest possible position to the operator's
abdominal area.
The retractable seat belt must be used by the
operator only. NEVER use the retractable seat belt
for two or more persons or to hold an object to the
operator.
2. Using the turn signal, headlight switches and hazard lights button switch.Turn Signals
(A)Turn signals switch
(a) Move the turn signals switch to the left to signal a left
turn of the tractor.
(b) Move the turn signals switch to the right to signal a right
turn of the tractor.
WARNING
WARNING
(A) (a)
A3013712
3013731
(A)
(b)(a)