14-16
14. PERIODIC SERVICE
Ex2900 / 3200 Operator's Manual
5. Checking the Operation of the Seat Safety Switch
1. Move the range shift lever into the NEUTRAL position.
2. Disengage the Rear Power Take Off (PTO)
engagement lever (OFF position). If the machine has
the Mid-Power Take Off (PTO) engagement lever,
disengage it.
3. Sit on the operator's seat.
4. Turn the starter key switch to the START position.
5. Check that the engine starts.
6. Remove all weights from the operator seat.
7. The solenoid switch responsible for stopping the
engine should be activated, and the engine must stop
running. If it does not, contact your local Cub Cadet
Yanmar dealer for repair.
(A)Range shift lever
(B)Rear Power Take Off (PTO) engagement lever
(C)Mid-Power Take Off (PTO) engagement lever
(option)
■Change the Engine Oil
For the maintenance work, see “Engine Oil” on page 14-25.
■Replacing the Engine Oil Filter
For the maintenance work, see “Changing the Engine Oil and Filter” on page 14-25.
■Replacing the Transmission Oil Filter
For the maintenance work, see “Changing the Transmission Oil and Filter, Cleaning the Transmission Oil Strainer”
on page 14-27.
■Changing the Transmission Oil
For the maintenance work, see “Changing the Transmission Oil and Filter, Cleaning the Transmission Oil Strainer”
on page 14-27.
■Cleaning the Transmission Strainer
For the maintenance work, see “Changing the Transmission Oil and Filter, Cleaning the Transmission Oil Strainer”
on page 14-27.
3. First 50 Hours3013703a
(B)(A) (C)