Cub Cadet l5 27 cc Controls and Features, Wedge, Tongue, Beam Locks, Log Dislodger, Control Handle, Control Handle, Engine Controls

Controls and Features 4

Cylinder

Tongue

Jack Stand

Engine Controls

Log Dislodger		Control
	Wedge	Handle

Horizontal

Beam Lock

Beam Assembly

Log Cradle

Vertical Beam Lock

Tail Light

Figure 4-1

Log Dislodger

See the Engine Operator’s Manual for the location and function of the controls on the engine.

Beam Locks

These two locks, as their name suggests, are used to secure the beam in the horizontal or the vertical position. The vertical beam lock is located next to the oil filter. The horizontal beam lock is located on the beam support latch bracket.

Control Handle

The control handle has three positions; Forward, Neutral and Reverse. See the Operation Section for instructions.

The log dislodger is designed to remove any partially split wood from the wedge. This may occur while splitting large diameter wood or freshly cut wood.

Control Handle

The Control Handle is used to move the wedge up and down to split wood.

Wedge

The wedge is used to split the wood.

Tongue

The tongue is used to attach to a towing vehicle for transportation.

10