Cub Cadet S7237 service manual Reconfigurable Mower

Reconfigurable Mower

	Front	Inner	Discharge	Cutting
	Skirt	Baffle	Baffle	Blades	Gauge Wheels	Front Roller	Rear Rollers
Standard set-up	Low	installed	installed	Hi-lift	Low = 3" to 5"	Low = 3" to 5"	Low = 3" to 5"
Stems (Dandelion, Bahia,					High = 1" to 2 1/2"	High = 1" to 2 1/2"	High = 1" to 2 1/2"
Buckhorn, etc.)	Med	removed	installed	Hi-lift	Low = 3" to 5"	Low = 3" to 5"	Low = 3" to 5"
					High = 1" to 2 1/2"	High = 1" to 2 1/2"	High = 1" to 2 1/2"
Very lush &/or tall grass	High	removed	installed	Hi-lift	Low = 3" to 5"	Low = 3" to 5"	Low = 3" to 5"
Low cut height (1" to 2")	Med	installed	installed	Low-lift	High = 1" to 2 1/2"	High = 1" to 2 1/2"	High = 1" to 2 1/2"
					High = 1" to 2 1/2"	High = 1" to 2 1/2"	High = 1" to 2 1/2"
Mulch	Low	installed	removed	Hi-lift/mulch	Low = 3" to 5"	Low = 3" to 5"	Low = 3" to 5"
								28
					High = 1" to 2 1/2"	High = 1" to 2 1/2"	High = 1" to 2 1/2"
Material Collection	Low	installed	installed	Hi-lift	Low = 3" to 5"	Low = 3" to 5"	Low = 3" to 5"
					High = 1" to 2 1/2"	High = 1" to 2 1/2"	High = 1" to 2 1/2"
Abraisive (sandy), dry	Low	removed	installed	Low-lift	Low = 3" to 5"	Low = 3" to 5"	Low = 3" to 5"
					High = 1" to 2 1/2"	High = 1" to 2 1/2"	High = 1" to 2 1/2"
Wet	Low	installed	installed	Hi-lift	Low = 3" to 5"	Low = 3" to 5"	Low = 3" to 5"

Notes:

This is a general outline of suggested settings, so keep in mind that your conditions may be different.

Adjustable Front Skirts - When "Low", increases lift for precision cutting. When "High", grass rebounds & can cut high volume grasses.

Removable Inner Flow-Control Baffle - Regulates discharge (remove for high volume grasses, and install for precision cutting).

Removable Discharge Baffle - Enhances the discharge spread pattern. Reduces clumping (it should be removed for mulching).

Adjustable Gauge Wheels - Reduces scalping, helps provide precision cutting, and reduces turf defacement during turns.

Adjustable Rear Rollers - Reduces scalping, and provides the striped appearance.

Cutting Blades - Create lift (axial flow), cutting action, and discharge (centrifugal flow). Low to High lift depending on the sail shape.

Discharge Chute - Controls the output (including thrown objects) and enhances the discharge pattern.

To avoid damage to grasses, no more than 1/3 of the height should be removed at one cutting (if 6" tall, cut to 4").