Keep the blender jar or food processor cover on while blending.
•Don't twist locking ring from blender jar when removing blender jar from motor base. Simply lift blender jar from motor base.
•Don’t overprocess foods. Blender or food processor will achieve most desired results in seconds, not minutes.
•Don’t overload blender or food processor. If the motor stalls, turn OFF immediately, unplug the unit, and remove a portion of the food, then continue.
•Don’t use any utensil inside the blender jar or food processor bowl while the motor is ON.
•Don’t use any container or accessories not recommended by Cuisinart. Doing so may result in injury.
•Don’t place hands inside the blender jar or food processor bowl when blender is plugged in.
•Don’t add boiling liquids or frozen foods (except ice cubes or 1/2" (1.3cm) pieces of frozen fruit) to glass blender jar. Boiling liquids should cool for
5 minutes before being placed in blender jar.
•The food processor accessory is not intended to crush ice. This could damage the chopping blade and will damage work bowl.
FOOD PROCESSOR FEATURES
AND BENEFITS
1.Food Pusher with Oil Dispenser
2.Bowl Cover with feed tube
3.Sharp stainless steel chopping blade chops raw and cooked food to any consistency from coarse chop to fine purée
4.Stainless steel reversible slicing/shredding disc makes perfect slices
5.Adapter stem
6.Clear work bowl
7.Gearbox Collar
8.Same motor base used for both the blender jar and the food processor bowl
FOOD PROCESSOR STEP BY STEP GETTING STARTED
Please note that the bowl with collar will fit on the base in eight different positions. The handle can be in front or on either side and the feed tube in front, back, or on either side.
Directions for use reference a certain position for instructional purposes only.
FOOD PROCESSOR ASSEMBLY FOR CHOPPING, PURÉEING & MIXING
SmartPower Duet |
| |
BLENDER/FOOD PROCESSOR |
| |
Stir | Ice | Pulse |
Crush | ||
Chop | On | Food |
Processor | ||
Mix | Purée |
|
| Off |
|
Food Pusher with Oil Dispenser (1)
Bowl Cover with Feed Tube (2)
Stainless Steel Chopping Blade (3)
Reversible Slicing/
Shredding Disc (4)
Adapter Stem (5)
Work Bowl (6)
Gearbox Collar (7)
Smart
BLENDER
StirBlender Base (8)
Chop
Mix
1.Hold gearbox collar in one hand and work bowl handle in the other. Twist bowl clockwise onto collar.
2.Place collar with bowl onto motor base with handle facing front.
3.Place chopping blade over shaft in
3.Place chopping blade over shaft in work bowl. Chopping blade should work bowl. Chopping blade should
slide easily to the bottom of the bowl. Lower blade will almost touch bottom of bowl.
BE SURE TO HANDLE THE METAL BLADE WITH CARE AS IT IS RAZOR SHARP!
4.Place food to be processed in work bowl. Put cover on work bowl, with feed tube at about 11 o’clock. Turn the cover clockwise until it fits into position. Cover lock must click into locked position prior to use. If you have trouble fitting the cover on
6
