There are notches (C) on opposite sides of the interior of the hub. These fit over ridges on the sides of the plastic blade sheath.

NOTCH

C.

Pick up the blade ring by its hub holding ribs (grips) and line up the notches in the interior of the blade ring hub with the ridges on the sides of the plastic blade sheath. Let the blade ring slide down to the bottom of the plastic blade sheath. The lower blade should almost touch the bottom of the prep bowl.

Lift the prep bowl, holding it firmly from the bottom. Pick up the blader ing by its hub holding ribs (grips) and turn it very slightly clockwise. This locks it in place on the plastic blade sheath and prevents it from sliding up during processing.

4.

4b.

 

4a.

 

Inside View of

 

Chopper/Grinder

 

Cover

 

Inside View of

 

Prep Bowl

3. Connect the Smart Stick® Hand

Blender motor body to the top of the 3. chopper/grinder attachment cover.

Align the spline in the chopper/grinder cover’s drive shaft with the ribbed opening on the underside of the motor body. When aligned properly, slide the two pieces together until you feel and hear a slight click. It may be helpful to press the rubber release button when sliding these pieces together.

4.With the hand blender in place, locate the chopper/grinder cover

and place it on top of the prep bowl.

Motor

Body Bottom and

Chopper/Grinder

Cover Top View

5.Plug the power cord of the Smart Stick® Hand Blender into an electrical outlet.

6.Place one hand on the cover of the chopper/grinder attachment, while gripping the Smart Stick® Hand Blender motor body handle with the other. Press the ON/OFF button with your fingers to start the motor and run the chopper/grinder.

To turn the unit off, remove your fingers from the ON/OFF button.

7.WHEN THE BLADE STOPS MOVING, unplug the Smart Stick® Hand Blender, remove the motor body from the chopper/grinder cover, and remove the cover from the prep bowl.

a.Be sure that the 3 ridges at the top of the blade assembly line up

with the 3-arm propeller gear in the underside of the chopper/ grinder cover, and that the cover is seated all around the top of the prep bowl.

b.To properly seat the cover, you must line up the three molded pins from the cover with the 3 slots at the top of the prep bowl. Rotate cover counterclockwise to secure it to the prep bowl.

Rotate the cover until the pins are in the far left position in the slots.

WHISK ATTACHMENT

1.Align the end of the whisk with the small opening of the whisk gearbox.

2.Push end into opening until it locks into position.

3. Align the motor body with the assembled whisk attachment and slide the pieces together until you hear and feel the pieces click together.

It may be helpful to press the release button when assembling.

10

11

Page 5 Page 7
Page 6
Image 6
Cuisinart CSB-77C manual Whisk Attachment, Place it on top of the prep bowl
Page 5 Page 7

CSB-77C specifications

The Cuisinart CSB-77C is a versatile handheld immersion blender that brings convenience and efficiency to any kitchen. Known for its sleek design and user-friendly features, this kitchen appliance is a favorite among both amateur cooks and seasoned chefs.

One of the main features of the CSB-77C is its powerful 200-watt motor. This robust motor allows for effective blending, chopping, and pureeing, making it ideal for a wide range of culinary tasks, from creamy soups to smoothie mixtures. The motor's design ensures that it operates quietly, providing a pleasant cooking experience without the noise often associated with traditional blenders.

The immersion blender is equipped with two-speed settings that offer intuitive control over blending tasks. The high speed is perfect for quickly integrating ingredients, while the low speed is great for more delicate tasks or for mixing ingredients gently. This flexibility makes the CSB-77C suitable for a variety of recipes, from chunky salsas to velvety purees.

Another standout characteristic of the CSB-77C is its ergonomic design. The blender features a soft grip handle that provides comfort during use, reducing strain on the hands while maintaining a secure grip. This thoughtful design allows for extended use without discomfort, making it easier to tackle larger blending tasks.

The stainless steel blending shaft is not only durable but also removable, allowing for easy cleaning. The shaft can be submerged in warm, soapy water for a quick wash or safely placed in the dishwasher. This ease of cleaning is a significant advantage over traditional blenders, making the CSB-77C a practical choice for daily use.

Included with the CSB-77C is a whisk attachment, adding to its functionality. This accessory is great for whipping cream, emulsifying sauces, and even preparing lightweight batters. The versatility of having multiple attachments enhances the appliance's value while providing a more comprehensive culinary experience.

Overall, the Cuisinart CSB-77C immerses users in convenience, power, and functionality. Whether you're looking to blend, puree, or whip, this immersion blender stands out as an essential tool for enhancing your culinary creations. Its combination of features and ease of use makes it a reliable choice for anyone looking to elevate their cooking experience.
Top Page Image Contents