Cuisinart CUI EM-100 manual Power, Espresso

PREPARING YOUR ESPRESSO MACHINE

1.Place the espresso machine on a dry, stable countertop or other surface where you will be using the machine.

Important: For first time use or if the machine has not been used for some time, it is important that the machine is rinsed as follows:

2. Insert the power cord into a

power outlet. Press the

7.Place a sufficiently large container under both pouring spouts (9).

8.Turn the function knob to the espresso setting (10) and allow the water to run through until the water reservoir is empty.

USING THE CONTROL PANEL

9

10

power button to turn the
espresso machine on (1).
The light located on the
power button will illuminate	1
red and the heating light will
also illuminate red; this
indicates that your espresso
machine is on and is heating
up. When the heating light	2
switches off, this indicates

that the espresso machine is heated and ready to use (2).

3.Make sure that the drip tray and grate are in place.

4. To fill the espresso machine		3
	with water. Simply lift the lid
	of the water reservoir at the
	top of the espresso machine
	(3) or fill with fresh cold
	water or filtered water (4).	4
5. Place cups on the warming
	plate (5).
6. Fit the portafilter handle with
	either the one or two cup or	5
	pod filter basket (6). Secure
	the portafilter handle to the
	brew head (7-8).
6	7	8

Power

NOTE: Before turning on the espresso machine, make sure that the function knob is in the off position.

Press the power button to turn the espresso machine on. The light located on the power switch will illuminate red and the heating light will illuminate red; this is to indicate that your espresso machine is on and is heating up.

The espresso machine will automatically adjust the temperature of the heating system to the espresso temperature. When the machine is heated and ready to use, the red heating light will go out.

NOTE: To turn the espresso machine off, simply press the power button.

Espresso

When the machine’s heating system has reached the correct temperature so that the red heating light is off, you can use the espresso machine. Simply turn the function knob clockwise to the espresso setting to start the pour and turn it back to the off position to stop.