![](/images/new-backgrounds/1061822/6182213x1.webp)
4. Press the | single espresso |
| |
button once to start the |
| ||
espresso pour (18). The light |
| ||
around the | single | 18 | |
espresso button will flash. | |||
|
5.Allow the espresso to pour until it reaches the desired level. Once that is reached, stop the espresso pour by pressing the single espresso button. A beep will signify that the new setting for the
single espresso operation has been programmed and stored in the machine’s memory.
6.The espresso machine will then return to normal operation mode and is ready to make another espresso at the push of a button.
Programming ![](/images/new-backgrounds/1061822/6182213xi4.webp)
Double Espresso
1.Prepare the portafilter holder. Fit it with the
2.Place two cups under both pouring spouts.
3.To begin programming press the program button (17). The light around the program button will show a steady blue light.
4.Press the double espresso button once to start
the espresso pour (18). The | |
light around the | button |
will flash. | 18 |
5.Allow the espresso to pour until it reaches the desired level. Once that level is reached, stop the espresso pour by pressing the double espresso button. A beep will signify
that the new setting for the double espresso operation has been programmed and stored into the machine’s memory.
6.The espresso machine will then return to normal operation mode and is ready to make another espresso at the push of a button
Resetting the Factory Settings
To revert to the original factory settings:
1.Press the program button once.
2.Press and hold down the manual button and program.
3.Continue holding down manual and program buttons for approximately 3 seconds or until you hear 2 beeps. When you hear the 2 beeps, the light around the and
buttons will flash, and after that, the program light becomes solid. The espresso machine has now returned to the original factory settings and the next time the single or double espresso functions are used the espresso pours will be 1.5 and 3.0 oz.
4.The espresso machine will then return to normal operation mode and is ready to make another espresso at the push of a button.
Guide to the perfect espresso
1.You may want to preheat the cups by filling them with hot water, this will help preserve the crema of the espresso. Set the cups aside.
2. Select the appropriate filter basket and insert it into portafilter handle (19).
TIP: Use the | 19 |
basket for a single espresso, |
|
|
the
3. Using the measuring scoop, place finely
ground coffee in the filter |
|
|
|
| 20 |
| |
basket holder (20). Use one |
|
|
|
scoop for one cup and two |
|
|
|
scoops for two cups, or place |
|
|
|
espresso pod in filter basket. |
|
|
|
4. Rest the portafilter handle |
|
|
|
| 21 |
| |
with the filter basket in |
|
|
|
|
|
| |
|
|
| |
position on the countertop. |
|
|
|
Using the tamping tool, apply |
|
|
|
a moderate packing pressure |
|
|
|
|
|
| |
(21). Add more coffee and |
|
|
|
tamp again if necessary to |
|
|
|
bring coffee to level. |
|
|
|
5. Brush any excess coffee |
| 22 |
|
|
|
| |
grounds from around the |
|
|
|
edge of the filter basket (22). |
|
|
|
IMPORTANT: Be sure not to overfill the filter basket with coffee.