Operations

Setting the Radio Station Presets

There are 60 programmable radio station presets available on the KR-3808 PRO (30 for AM and 30 for FM).

To set a radio station preset.

1.Use the PRESET CHANNEL + and - (CH+ and CH- on rem ote control) to select a preset number ie CH4.

2.Use the SCAN or TUNE buttons to select the radio station you would like to assign to the preset.

3.Press and hold the SCAN button on the front panel (memory on remote control) to assign the current radio station to CH4.

4.Repeat the previous steps for addition presets.

Using the AUTO Feature

The AUTO feature is designed to conveniently switch between active input channels and eliminate moments of silence between Karaoke performances. When playback is initiated on a player connected to the AV1 or AV2 channels, the KR-3808 automatically selects that channel as the active input channel. When there is no signal detected from the AV1 or AV2 channels, the KR-3808 automatically switches to the DVD channel.

To utilize the DVD channel, simply connect a source player to the DVD jacks and have it set to repeat playback or similar playback mode with a steady stream of music/video output. When playback ends on a player connected to the AV1 or AV2 channels, DVD channel playback will immediately begin eliminating extended periods of silence between performances.

To adjust the level of the DVD audio, use the DVD LEVEL dial on the back panel, located near the DVD input.

To enable the AUTO feature, press and hold the INPUT button down until the AUTO indicator is illuminated.

To disable the AUTO feature, press the INPUT button to return to manual input selection.

Note: The switch to DVD when the signal stops may take a few seconds.

Using the TALK OVER Feature

The talk over function can be useful for making announcements without having to manually adjust the master volume. With the talk over function active, the music volume will be reduced automatically when the microphones are spoken into. For Karaoke, it’s recommended that you leave the talk over function off.

To enable the talk over function, press the TALK button on the front panel or remote control. The TALK light will illuminate in the display window.

To turn off the talk over function, press the TALK button on the front panel or remote control. The TALK light will turn off in the display window.

20

Page 22
Image 22
VocoPro KR-3808 PRO Operations, Setting the Radio Station Presets, Using the Auto Feature, Using the Talk Over Feature