Getting Connected
About the Remote Control
•The area between the remote control and the main unit must be clear of large obstacles.
•Do not expose the remote control sensor to strong lighting, especially an inverter type fluorescent lamp as this may cause the remote control to not function properly.
Installing Batteries in the Remote Control
1.Turn the remote control over and slide the battery compartment cover off towards the direction of the
arrow.
2.Insert the AA batteries, positioning them according
to the polarity
(+,
3.Close the battery compartment cover.
Image shown is a generic model for reference.
Battery Replacement
If you fi nd that the distance between the remote control and the main unit must be shorter in order to use the remote control , this means that the batteries are low and must be changed. Replace both batteries with new ones.
Battery N otes:
•Use AA batteries.
•Be sure the polarities (+, ) are correct. (See the illustration inside the battery compartment).
•Remove the batteries when not using the remote control for an extended period of time.
•If batteries leak, dispose of them immediately. Avoid skin, clothing and any other contact with the leaked material. Clean the battery compartment thoroughly before installing new batteries.
•Do not mix old and new batteries.
•Do not mix alkaline, standard
Connecting the Power Cable
Plug the supplied AC power cable into the AC inlet after all other connections are complete and then plug the AC power cable to an AC wall outlet.
CAUTION
Use the supplied AC cable. Do not use other AC power cables as doing so may result in fi re hazard or electrical shock.
Image shown is a generic model for reference.
7
