the proper water line. For example, if you added 2 cups of raw rice, add water to line 2 (white rice only).
5.Cover the cooking bowl with lid. Make sure the steam vent is facing toward the back of the unit.
6.Plug in unit.
7.Set to the cook position by pressing the switch down. The Cook LED light will be illuminated.
8.Rice cooker will heat and cook the rice. Cooking time will vary, depending on the amount and type of rice or grain being cooked.
9.Once the rice is cooked, the unit will automati- cally switch to the Warm setting and the Warm LED will be illuminated. The unit will stay in Warm mode until the unit is unplugged from the outlet.
10.For best texture, allow cooked rice to rest in Warm mode for 5 to 10 minutes.
11.Once you are ready to serve the rice, lift the lid away from you.
12.Fluff rice with paddle or utensil suitable for nonstick cookware.
13.Lift and remove cooking bowl from rice cooker using potholders.
Cooking Rice and Steaming
1.Clean and prepare your vegetables, seafood, fish or poultry.
2.Follow steps 1 to 8 under the Cooking Rice section (page 4).
3.Fill the steaming tray with open end facing up.
4.Place the filled steaming tray on top of the cooking bowl at the appropriate time for food being steamed. See Steaming Guide (page 7), for approximate cooking times.
5.Place lid on top of the steaming tray.
6.When the appropriate cooking time has elapsed, unplug the unit.
Steaming Only
1.Make sure unit is unplugged.
2.Fill cooking bowl with the suggested amount of water based on the Steaming Guide.
3.Fill the steaming tray with open end facing up.
4.Place the filled steaming tray on top of the cooking bowl.
5.Place lid on top of the steaming tray.
6.When water is completely evaporated, the unit will automatically switch to the Warm setting and the Warm LED will be illuminated. The unit will stay in Warm mode until the unit is unplugged from the outlet. Do not allow bowl to boil dry.
7.For best results, unplug unit immediately after the unit switches to Warm, to prevent
Reheating Rice
1.Make sure unit is unplugged.
2.To reheat rice, add ¼/4 cup (4 tablespoons) of cold water per cup of cooked rice.
3.Stir to mix.
4.Place lid on top of the cooking bowl.
5.Plug in unit and set to the cook position by pressing the switch down. The Cook LED light will be illuminated.
6.Once the rice is cooked, the unit will automati- cally switch to the Warm setting and the Warm LED will be illuminated. The unit will stay in Warm mode until the unit is unplugged from the outlet.
CLEANING AND CARE
1.Unplug your Cuisinart® Rice Cooker/Steamer and allow it to cool before cleaning.
2.Place cooking bowl, steaming tray and lid in the dishwasher or wash with warm, soapy water. If food sticks to the surface, fill with warm, soapy water and allow to soak before cleaning.
3.If scouring is necessary, use a nonabrasive cleanser or liquid detergent with a nylon pad or brush.
4.Wipe base of unit with a soft, damp cloth or microfiber towel. NEVER IMMERSE BASE OF
UNIT IN WATER.
5.Make sure all parts are cool before storing. Store unit in a clean, dry place.