ASSEMBLY | e. |
To use your Cuisinart® |
|
Blend and Cook Soupmaker, begin |
|
by assembling the blender jar. |
|
1. Place jar collar with blade | d. |
assembly (a) on a flat, sturdy |
|
surface. |
|
2.Carefully place the rubber gasket
(b) inside the jar collar.
3. Place the blender jar (c) on the | c. |
collar and turn clockwise until |
|
tight. |
|
Note: Blades are sharp. Handle carefully.
4.Place lid (d) on jar and push until secure. Place measuring cup (e) in the lid opening and press into lid.
5.When placing jar onto base, be sure arrow on jar collar, located just below the handle, is aligned with arrow on base (Fig. 1). Place
jar onto base, making sure the 3 interlocking pins on the underside of the collar (Fig. 2) fit into the
rectangular rubber connector on b. the base (Fig. 3).
NOTE: If jar does not sit flush on base, do not force it! Remove jar and
slightly turn the clutch (Fig. 4), located a. in the center of the top of the base.
CAUTION: Do not adjust jar collar clutch after cooking, as it may be hot.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
HELPFUL REMINDERS
r 0ODFUIFDPWFSJTJOQPTJUJPOBEEJUJPOBM ingredients can be added during blending by simply lifting the measuring cup, adding ingredi- ents through lid opening, and replacing the mea- suring cup.
r CAUTION: Be sure lid is on and measuring cup is in lid opening when blending hot liquids.
r Lid should always be in place while the unit is on.
r CAUTION: Collar is hot when making soup. Handle carefully.
r Keep hands away from the underside of collar. The surface will also be very hot.
r CAUTION: Do not place blender jar on base while motor is running.
r %POPUUXJTUCMFOEFSDPMMBSGSPNCMFOEFSKBSXIFO removing blender jar from base. Simply lift blender jar from motor base.
r CAUTION: Do not put your hand on top of blender while blending. Hot steam can come through vents.
r 'PMMPX$MFBOJOHBOE.BJOUFOBODFJOTUSVDUJPOT (page 6), prior to your first use.
4