HOLD THE BLADE RING BY THE CENTRAL HUB HOLDING RIBS (grips) (K)

ONLY. DO NOT TOUCH THE RAZOR-SHARP BLADES.

Note these important features of the blade ring. The blade ring can be placed over the plastic blade sheath in two different ways:

If you hold it as in figure A, you will see the word “Sharp” on the blade. Assemble the blade this side up to use the sharp edge. (See the section on processing food, page 9, for information about when to use the sharp edge.)

If you hold it as in figure B, you will see no writing on the blade. Assemble the blade this side up to use the blunt edge.

See the section on processing food, page 9, for information about when to use the blunt edge.

There are notches (K) on opposite sides of the interior of the hub. These fit over ridges on the sides of the plastic blade sheath.

BLUNT SIDE UP

A

SHARP SIDE

K-NOTCH

Pick up the blade ring by its hub holding ribs (grips) and turn it very slightly clockwise. This locks it in place on the plastic blade sheath and prevents it from sliding up during processing.

3.Connect the hand blender motor body to the top of the chopper/grinder attachment cover. Align the spline, in the chopper/grinder cover’s drive shaft with the ribbed opening on the underside of the motor body. When aligned properly, slide the two pieces together until they mate. You will feel and hear a slight click. It may be helpful to press the rubber release button when sliding these pieces together.

4.With the hand blender in place, locate the chopper/ grinder cover and place it on top of the prep bowl.

a.Be sure that the 3 ridges (cover slots) at the top of the prep bowl line up with the 3 notches in the underside of the chopper/grinder cover, and that the cover

is seated all around the top of the prep bowl.

b. To rotate cover clockwise to secure it to the prep bowl.

5.Place one hand on the cover of the chopper/grinder attachment, while gripping the hand blender motor body handle with the other. Press the High or Low button with your fingers to start the motor and run the chopper/grinder.

To turn the unit off, remove your fingers from the

4a.

selected button.

 

6.WHEN THE BLADE STOPS MOVING, remove the motor body from the chopper/grinder cover, and remove the cover from the prep bowl.

Whisk attachment

1.Align the end of the whisk (A) with the small opening of the whisk gearbox (B).

2.Push end into opening until it locks into position (C).

3. Align the motor body with the assembled whisk attachment and slide the pieces together until you hear and feel the pieces click together. It may be helpful to press the release button

when assembling.

3.

Motor body bottom – top view

Chopper/ grinder cover – top view

Chopper/ grinder

cover assembly

7

Page 6 Page 8
Page 7
Image 7
Cuisinart CSB-78, Smart Stick PLUS manual Blunt Side UP, ONLY. do not Touch the RAZOR-SHARP Blades
Page 6 Page 8

Smart Stick PLUS, CSB-78 specifications

The Cuisinart CSB-78 is a versatile and powerful hand blender that brings convenience and efficiency to your kitchen. Known for its sleek design and robust performance, this immersion blender is perfect for a variety of cooking tasks.

One of the standout features of the Cuisinart CSB-78 is its powerful 200-watt motor. This motor is designed to handle tough blending tasks with ease, allowing you to make smoothies, soups, sauces, and even whipped cream effortlessly. Additionally, the motor operates quietly, so you can blend your ingredients without disturbing the entire household.

The CSB-78 comes equipped with a 2-speed slide control, which provides the flexibility to adjust the blending speed based on the food you are preparing. Whether you need a gentle blend for delicate ingredients or a high-speed chop for tougher items, this hand blender has you covered. This versatility makes it suitable for a wide range of applications in the kitchen.

Another notable characteristic of the Cuisinart CSB-78 is its ergonomically designed handle. The soft-grip handle ensures comfort during use and provides excellent control, allowing you to achieve precise results. Coupled with the lightweight design, this hand blender minimizes hand fatigue, even during extended blending sessions.

The CSB-78 features a stainless steel blending shaft that not only adds to its modern look but also enhances its durability. The removable shaft is dishwasher safe, making cleanup a breeze. Furthermore, the blender comes with a variety of attachments, including a whisk and a chopper, which expand its functionality, allowing you to tackle numerous culinary tasks.

Safety is paramount with the Cuisinart CSB-78. The unit is designed with a locking mechanism that prevents accidental activation, giving you peace of mind while working in the kitchen. It also has a splash guard that helps to keep your workspace tidy by reducing mess during blending.

In conclusion, the Cuisinart CSB-78 hand blender stands out due to its powerful motor, adjustable speeds, ergonomic design, and versatility. It is an indispensable tool for both novice cooks and experienced chefs alike, making it easier than ever to prepare a wide array of delicious dishes. Whether you seek to puree soups, mix batters, or whip cream, this immersion blender is designed to tackle all your blending needs with ease and efficiency.
Top Page Image Contents