TC972 english.qxd 4/13/2004 10:58 AM Page 9
Getting Started
3.Insert one plug of the Telephone Line Cord into the house Telephone Jack and the other end into the Telephone Line Connection Jack at the back of the Base Unit. ( If you have and older
CAUTION: The cordless telephone operates at a frequency that cause interference to nearby TVs and VCRs; the base phone should not be placed near, or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference.
Battery Installation
To install the 3.6V 600mAh cordless Handset battery pack:
1.Install the Handset Battery Pack by plugging it into the Battery connector inside the Battery compartment. Place the Battery Pack inside the Battery Compartment.
2.Slide the Handset Battery compartment cover firmly into place in its closed position
3.Once you have installed the Battery Pack and placed the Handset on the cradle you will hear a tone indicating the Handset has connected with the charging contacts and will successfully charge.
4.IMPORTANT: Before initial use, charge the Handset for 12 hours.
BATTERY PACK
BATTERY
COMPARTMENT COVER
Battery Duration
A fully charged battery lasts for approximately:
4 hours when you use the Handset continuously (talk time). 5 days when the Handset is not in use (standby).
8
