Installing the VoIP Loudspeaker Amplifier 11

Table 2-6. Loudspeaker Amplifier LEDs (continued)

LEDColorFunction

Activity

Green

The Activity LED blinks to indicate network traffic.

 

 

 

2.2.5 Confirm the IP Address, Test the Audio, and Check the Volume

When the loudspeaker amplifier is operational and linked to the network, use the Reset Test Function Management (RTFM) switch (Figure 2-7) on the loudspeaker amplifier face to announce and confirm the loudspeaker amplifier’s IP Address, test that the audio is working, and check the volume.

Figure 2-7. RTFM Switch

RTFM switch

To announce a loudspeaker amplifier’s current IP address:

1. Press and hold the RTFM switch until it beeps (after one second).

VoIP Loudspeaker Amplifier Operations Guide

930106A

CyberData Corporation