Installing the VoIP Loudspeaker Amplifier 23

Table 2-12. Firmware Upgrade Parameters (continued)

 

 

 

Web Page Item

Description

 

 

 

 

Load new firmware to Partition 1

Enter the TFTP Server IP address.

 

 

 

New Filename

Enter the new file name for the kernel or application

 

firmware file that you are uploading.

Click on this button to automatically upload the selected firmware and reboot the system.

Link to the Speaker Setup page.

Link to the Network Setup page.

Link to go to the SIP Setup page.

Link to the Home page.

Click on this button to reboot the system.

2.4.1 Reboot the Loudspeaker Amplifier

To reboot a loudspeaker amplifier, log in to the web page as instructed in Section 2.3.1, "Log in to the Configuration Home Page".

1.Click Upgrade Firmware to open the Firmware Upgrade page (Figure 2-14). Use the Reboot System section on the right side of the page.

VoIP Loudspeaker Amplifier Operations Guide

930106A

CyberData Corporation