Installing the VoIP Loudspeaker Amplifier 13

2.3 Configure the Loudspeaker Amplifier Parameters

To configure the loudspeaker amplifier online, use a standard web browser.

Configure each loudspeaker amplifier and verify its operation before you mount it. When you are ready to mount a loudspeaker amplifier enclosure, refer to Chapter 3, “Mounting the Enclosure” for instructions.

All loudspeaker amplifiers are initially configured with the default IP settings indicated in Table 2-7.

When configuring more than one loudspeaker amplifier, attach the loudspeaker amplifiers to the network one at a time to avoid IP address conflicts.

 

Table 2-7. Factory Default Settings

 

 

Parameter

Factory Default Setting

 

 

IP Addressing

static

 

 

IP Address

192.168.3.10

 

 

Web Access Username

admin

 

 

Web Access Password

admin

 

 

Subnet Mask

255.255.255.0

 

 

Default Gateway

192.168.3.1

 

 

2.3.1Log in to the Configuration Home Page

1.Open your browser to the speaker IP address.

For the initial configuration of the speaker, open your browser to the default IP address: http://192.168.3.10

Note Make sure that the PC is on the same IP network as the loudspeaker amplifier.

2.When prompted, use the following default Web Access Username and Web Access Password to access the Home Page (Figure 2-9):

Web Access Username: admin

Web Access Password: admin

VoIP Loudspeaker Amplifier Operations Guide

930106A

CyberData Corporation