22 Installing the VoIP Loudspeaker Amplifier

Figure 2-13. Firmware Upgrade Page

VoIP Loudspeaker Amplifier

7.Enter the IP address of your TFTP server into the TFTP Server IP parameter field.

8.Enter the firmware filename of the file to be uploaded into the New Filename parameter field. For example, kernel filename "201-image-spk-sip.bin".

9.Click Upload File.

Note This starts the upload process. Once the speaker has uploaded the file, the Uploading Firmware countdown page appears, indicating that the firmware is being written to flash. The speaker will automatically reboot when the upload is complete. When the countdown finishes, the Firmware Upgrade page will refresh. The uploaded firmware filename should be displayed in the system configuration (indicating successful upload and reboot).

10.Repeat steps 8 and 9 if you are uploading the Kernel and Application files. For example, Application filename "201-romdisk-spk-sip.img".

Table 2-12shows the web page items on the Firmware Upgrade page.

 

Table 2-12. Firmware Upgrade Parameters

 

 

Web Page Item

Description

 

 

System Configuration

Shows the current configuration.

 

 

Bootname

Shows the current boot loader filename.

 

 

Kernel

Shows the current kernel filename for partition 1 and 2.

 

 

Application

Shows the current application filename for partition 1

 

and 2.

 

 

CyberData Corporation

930106A

VoIP Loudspeaker Amplifier Operations Guide