CY62138EV30
MoBL®
Document #: 38-05577 Rev. *A Page 3 of 9

Maximum Ratings

(Above which the useful life may be impaired. For user guide-
lines, not tested.)
Storage Temperature..................................–65°C to +150°C
Ambient Temperature with
Power Applied...............................................55°C to +125°C
Supply Voltage to Ground
Potential........................................ –0.3V to VCC(MAX) + 0.3V
DC Voltage Applied to Outputs
in High-Z State[4,5].........................–0.3V to VCC(MAX) + 0.3V
DC Input Voltage[4,5]......................–0.3V to VCC(MAX) + 0.3V
Output Current into Outputs (LOW).............................20 mA
Static Discharge Voltage.......................................... > 2001V
(per MIL-STD-883, Method 3015)
Latch-up Current.....................................................> 200 mA
Product Range Ambient
Temperature VCC[6]
CY62138EV30LL Industrial –40°C to +85°C 2.2V to
3.6V
Electrical Characteristics Over the Operating Range
Parameter Description Test Conditions
CY62138EV30-45
UnitMin. Typ.[3] Max.
VOH Output HIGH Voltage IOH = –0.1
mA VCC = 2.20V 2.0 V
IOH = –1.0
mA VCC = 2.70V 2.4 V
VOL Output LOW Voltage IOL = 0.1 mA VCC = 2.20V 0.4 V
IOL = 2.1 mA VCC = 2.70V 0.4 V
VIH Input HIGH Voltage VCC = 2.2V to 2.7V 1.8 VCC + 0.3V V
VCC= 2.7V to 3.6V 2.2 VCC + 0.3V V
VIL Input LOW Voltage VCC = 2.2V to 2.7V –0.3 0.6 V
VCC= 2.7V to 3.6V –0.3 0.8 V
IIX Input Leakage
Current GND < VI < VCC –1 +1 µA
IOZ Output Leakage
Current GND < VO < VCC,
Output Disabled –1 +1 µA
ICC VCC Operating
Supply Current f = fMAX =
1/tRC
VCC = VCCmax
IOUT = 0 mA
CMOS levels
15 20 mA
f = 1 MHz 2 2.5 mA
ISB1 Automatic CE
Power-down
Current — CMOS
Inputs
CE > VCC – 0.2V, VIN > VCC – 0.2V,
VIN < 0.2V), f = fMAX (Address and
Data Only), f = 0 (OE, and WE),
VCC = 3.60V
17µA
ISB2 Automatic CE
Power-down
Current — CMOS
Inputs
CE > VCC – 0.2V,
VIN > VCC – 0.2V or VIN < 0.2V,
f = 0, VCC = 3.60V
17µA
Capacitance for all packages[7]
Parameter Description Test Conditions Max. Unit
CIN Input Capacitance TA = 25°C, f = 1 MHz,
VCC = VCC(typ.)
10 pF
COUT Output Capacitance 10 pF
Notes:
4. VIL(min.) = –2.0V for pulse durations less than 20 ns.
5. VIH(max) = VCC+0.75V for pulse durations less than 20 ns.
6. Full device AC operation assumes a 100 µs ramp time from 0 to VCC(min.) and 200 µs wait time after VCC stabilization.
[+] Feedback