Read Cycle No OE Controlled14 | Cypress CY62138EV30 instruction

CY62138EV30

MoBL®

Read Cycle No. 2 (OE Controlled)[14, 15]

NOTE 17

tHZOE

Notes:

15.Address valid prior to or coincident with CE transition LOW.

16.Data I/O is high impedance if OE = VIH.

17.During this period, the I/Os are in output state and input signals should not be applied.

18.If CE goes HIGH simultaneously with WE HIGH, the output remains in high-impedance state.

Document #: 38-05577 Rev. *A

Page 6 of 9

[+] Feedback

Image 6

Contents

Functional Description1 FeaturesLogic Block Diagram Cypress Semiconductor Corporation = 1 MHz = f max Min Typ Max Pin Configuration2Product Portfolio Typ Max Electrical Characteristics Over the Operating Range Maximum Ratings AC Test Loads and Waveforms Data Retention Characteristics Over the Operating RangeThermal Resistance Data Retention Waveform 45 ns Parameter Description Unit Min Max Read Cycle Switching Characteristics Over the Operating Range9Switching Waveforms Write Cycle Read Cycle No OE Controlled14 Write Cycle No WE Controlled16 Write Cycle No CE Controlled16 Inputs/Outputs Mode PowerTruth Table Write Cycle No WE Controlled, OE LOW18 Package Diagrams Ordering InformationBall Vfbga 6 x 8 x 1 mm Issue Orig. Description of Change Date Document History