CY7C1422BV18, CY7C1429BV18
CY7C1423BV18, CY7C1424BV18
Document #: 001-07035 Rev. *D Page 23 of 30

Switching Characteristics

Over the Operating Range [20, 21]
Cypress
Parameter Consortium
Parameter Description 300 MHz 278 MHz 250 MHz 200 MHz 167 MHz Unit
Min Max Min Max Min Max Min Max Min Max
tPOWER VDD(Typical) to the First Access [22] 11111ms
tCYC tKHKH K Clock and C Clock Cycle Time 3.3 8.4 3.6 8.4 4.0 8.4 5.0 8.4 6.0 8.4 ns
tKH tKHKL Input Clock (K/K; C/C) HIGH 1.32 – 1.4 – 1.6 – 2.0 – 2.4 – ns
tKL tKLKH Input Clock (K/K; C/C) LOW 1.32 – 1.4 – 1.6 – 2.0 – 2.4 – ns
tKHKHtKHKHK Clock Rise to K Clock Rise and C
to C Rise (rising edge to rising edge) 1.49 – 1.6 – 1.8 – 2.2 – 2.7 – ns
tKHCH tKHCH K/K Clock Rise to C/C Clock Rise
(rising edge to rising edge) 01.4501.5501.802.202.7ns
Setup Times
tSA tAVKH Address Setup to K Clock Rise 0.4 – 0.4 – 0.5 – 0.6 – 0.7 – ns
tSC tIVKH Control Setup to K Clock Rise
(LD, R/W)0.4 – 0.4 – 0.5 – 0.6 – 0.7 – ns
tSCDDR tIVKH Double Data Rate Control Setup to
Clock (K/K) Rise
(BWS0, BWS1, BWS2, BWS3)
0.3 – 0.3 – 0.35 – 0.4 – 0.5 – ns
tSD [23] tDVKH D[X:0] Setup to Clock (K/K) Rise 0.3 – 0.3 – 0.35 – 0.4 – 0.5 – ns
Hold Times
tHA tKHAX Address Hold after K Clock Rise 0.4 – 0.4 – 0.5 – 0.6 – 0.7 – ns
tHC tKHIX Control Hold after K Clock Rise
(LD, R/W)0.4 – 0.4 – 0.5 – 0.6 – 0.7 – ns
tHCDDR tKHIX Double Data Rate Control Hold after
Clock (K/K) Rise
(BWS0, BWS1, BWS2, BWS3)
0.3 – 0.3 – 0.35 – 0.4 – 0.5 – ns
tHD tKHDX D[X:0] Hold after Clock (K/K) Rise 0.3 – 0.3 – 0.35 – 0.4 – 0.5 – ns
Notes
21.When a part with a maximum frequency above 167 MHz is operating at a lower clock frequency, it requires the input timings of the frequency range in which it is being
operated and outputs data with the output timings of that frequency range.
22.This part has a voltage regulator internally; tPOWER is the time that the power must be supplied above VDD minimum initially before a read or write operation can be
initiated.
23.For D2 data signal on CY7C1429BV18 device, tSD is 0.5 ns for 200 MHz, 250 MHz, 278 MHz and 300 MHz frequencies.
[+] Feedback