D-Link DCS-5010L user manual Wireless Setup

Section 3 - Configuration

Wireless Setup

This section allows you to set up and configure the wireless settings on your camera.

Enable Check this box to allow your camera to connect to your network Wireless: wirelessly.

SSID: Enter the network name (SSID) of the wireless network you want to connect to. You can also click the Site Survey button below to choose an available network and fill in settings automatically.

Channel: If you are using Ad-Hocas your connection mode, select the same channel that is being used by your wireless network.

Connection Select the connection mode used by your wireless network. In most Mode: cases, you should select Infrastructure. Ad-Hocis only used if your camera is directly connecting to another PC or device without the use

of a router or access point.

Site Survey: Clicking this button will allow you to select an available wireless network to connect to, and will fill in the necessary settings for you.

Wireless Select the wireless security mode used by your wireless network. If Security Mode: you select WEP or WPA-PSK/WPA2-PSK, enter the password for your

wireless network in the text box that appears.

D-Link DCS-5010L User Manual 25