
Section 2: Assembly and Installation
1. Place the plastic cable cover onto the
2. Locate a suitable position on the ceiling for the mounting plate to be installed.
3. Use the mounting template to mark the holes for installation.
Figure 2.5
4.Drill four separate 6mm holes corresponding to the holes in the mounting template and insert the plastic anchors into these holes.
5.Attach the surface bracket to the ceiling using the screws provided.
6.Place the dome body onto the base of the camera. (Figure 2.6)
7.Attach the dome to the base of the camera using the three long screws and the provided security screw.
Figure 2.6
14 |