Section 2: Assembly and Installation

Adjusting the lens 3-axis Gimbal

Adjust the Viewing Angle of the 3-axis Mechanism

Turn the lens module left or right until the desired position is achieved. Tighten the pan screw once completed.

Loosen the tilt screws on both sides of the camera, and turn the lens module up and down until the desired position is achieved. Tighten the tilt screws once completed.

Turn the lens to adjust the IP camera’s image until the desired orientation is achieved and then tighten the image adjustment screw once completed.

D-Link DCS-6513 User Manual

24

Page 24
Image 24
D-Link DCS-6513 user manual Adjusting the lens 3-axis Gimbal, Adjust the Viewing Angle of the 3-axis Mechanism