D-Link DGS-1248T manual Rack Mounting, Attach the adhesive rubber pads to the bottom

When installing the Switch on a level surface, attach the rubber feet to the bottom of each device. The rubber feet cushion the hub and protect the hub case from scratching.

Figure 1. Attach the adhesive rubber pads to the bottom

Rack Mounting

The Switch can be mounted in an EIA standard-size, 19-inch rack, which can be placed in a wiring closet with other equipment. Attach the mounting brackets at the Switch’s front panel (one on each side), and secure them with the provided screws.

Figure 2. Combine the Switch with the provided screws

Then, use screws provided with the equipment rack to mount each Switch in the rack.

Figure 3. Mount the Switch in the rack

7